reducer如何翻譯？

麥滿歌開石大成 2006-03-27 00:52:31 526 瀏覽

機械零配件中reducer如何翻譯？

參與評論

評論

登錄后參與評論

全部評論(3條)

dhidjlkjlksjj 2006-03-28 00:00:00

減壓器

贊(10)

回復(0)

評論

評論
登錄后參與評論
timef296 2006-03-28 00:00:00

減速器或減壓器

贊(19)

回復(0)

評論

評論
登錄后參與評論
雙月口王 2006-03-28 00:00:00

reducer [ri:5dju:sE] n. 縮減者，減壓器，還原劑 reducer [ri:5dju:sE] n. 縮減者; 縮小物漸縮管; 異徑[變徑，減徑，轉接，漸縮]接頭，大小頭扼流，節流器減壓器[閥]，減振器[機] 【化】還原劑[器，塔]，退粘劑，脫揮發油或輕餾分的設備簡化器，變換器，切碎器【攝】減薄劑[液] 粗紗機，練條機 automatic data reducer 自動數據簡化器 Belitzski's reducer 【攝】比利茲基減薄劑 bull gear reducer 大齒輪減速機 catalyst reducer 催化劑還原器 cerium-thermic reducer 鈰熱還原劑 combined reducer 混合減弱劑 motorized speed reducer 電動減速器 noise reducer 消聲器 packaged reducer 小型減速機 photographic reducer 照相減薄劑照相還原劑 piloted reducer 先導式減壓閥 pipe reducer 漸縮管; (不同管道連結的)大小頭 planetary reducer 行星減速齒輪裝置 planet-gear speed reducer 行星齒輪減速機 slab reducer 初軋板坯齊板壓力機 speed reducer 減速器 spur type planetary reducer 正齒式行星減速齒輪(裝置) spur-gear speed reducer 正齒輪減速機 worm reducer 蝸輪減速器 worm-gear speed reducer 蝸輪減速機

贊(2)

回復(0)

評論

評論
登錄后參與評論

登錄或新用戶注冊

微信登錄
密碼登錄
短信登錄

請用手機微信掃描下方二維碼
快速登錄或注冊新賬號

微信掃碼，手機電腦聯動

注冊登錄即表示同意《儀器網服務條款》和《隱私協議》

熱門問答

reducer如何翻譯？: 機械零配件中reducer如何翻譯？

pressure reducer什么意思:

2000目砂紙如何翻譯:

如何證明轉錄和翻譯同時發生:

“雙輥開煉機”英文如何翻譯？:

翻譯翻譯，請高手幫我翻譯一下這個說明: Followthesysteminstallationinstructionscarefullyandinthespecifiedorder.ThesoftwaremustbeinstalledonthecomputerbeforeconnectingtheUSBcable.2.1FacilitiesRequirementsFacilit... Follow the system installation instructions carefully and in the specified order. The software must be installed on the computer before connecting the USB cable. 2.1 Facilities Requirements Facilities requirements for the alpha-SE system are listed in Table 2-1 and the system dimensions are given in Fig. 2-1. As shown in Fig. 2-2， the alpha-SE tool requires a clear work area of 20 by 18 inches (500 by 460 mm)， excluding the operator computer. 2.2 Unpacking the Hardware Opening the Shipping Container Move the alpha-SE shipping container to the area where the tool will be installed. Open the container and remove the top and side pieces of packing foam. Carefully remove all smaller components from the shipping container， verifying that you received all components， as shown in Fig. 2-3. Finally， remove the alpha-SE ellipsometer and position it on your clear 20” by 18” (510 by 460 mm) workspace. Caution: The alpha-SE ellipsometer without sample chuck weighs approximately 37 lbs. (16 kg.). Please find an assistant to lift the alpha-SE unit out of the shipping carton and on to clear work surface. 展開

生物化學翻譯: To show that HAX-1 degradation is part of the apoptotic process and any involvement Omi may have， we used the ucf-101 inhibitor. ucf-101 is a specific inhibitor of the proteolytic activity of Omi and has been described previously (13). When... To show that HAX-1 degradation is part of the apoptotic process and any involvement Omi may have， we used the ucf-101 inhibitor. ucf-101 is a specific inhibitor of the proteolytic activity of Omi and has been described previously (13). When HK-2 cells were treated with cisplatin in the presence of ucf-101， the percentage of apoptotic cells decreased and the inhibitor significantly blocked HAX-1 degradation. This effect was more pronounced when a higher concentration of the inhibitor was used. To confirm the specificity of the inhibitor in this system and exclude the possibility that another protease rather than Omi is involved in HAX-1 cleavage， we used cell lines derived from mnd2 mice (9). The parent cell line (mnd2-MSCV) derived from mouse embryo fibroblasts has no detectable Omi proteolytic activity (9). The same cell line has been transfected with wild type human Omi cDNA (mnd2-MSCV-Omi) and expresses high levels of active Omi protein (14). We found that in mnd2-MSCV cells， when induced to undergo apoptosis with various stimuli， the number of apoptotic cells was very low. Furthermore， no detectable cleavage of HAX-1 was observed. This is in contrast with the mnd2-MSCV-Omi cells where apoptosis was robust， and HAX-1 levels were inversely proportional to the degree of apoptosis. This experiment clearly shows that Omi is solely responsible for HAX-1 cleavage， which is essential for apoptosis under the conditions used in these experiments. HAX-1 subcellular localization depends on cell type (21， 30) and has been reported to be present in the mitochondria， cytoplasm， or plasma membrane (10， 21， 22， 30). We performed subcellular fractionation to investigate where HAX-1 cleavage by Omi takes place. We found that， in HEK293 cells， HAX-1 was predominantly present in the mitochondria， and this localization did not change in response to apoptotic stimuli. This suggests that Omi can initiate apoptosis in the mitochondria by cleaving HAX-1 protein. This is in accord with a recent study that shows Omi can induce apoptosis in human neutrophils treated with TNF- without being released from the mitochondria (7). Although several studies clearly define HAX-1 as an anti-apoptotic protein， the mechanism of its function is unknown. HAX-1 has sequence similarity to Bcl-2 family of proteins (10， 22). 展開

求翻譯。。。。。。。。。。。: During the preparation of the nano-products， these nano-units， such as nanoparticles， nanoclusters， nanowires and nanorods， can also self-assemble into the novel structural aggregates by several routes， including electron irradiation deposi... During the preparation of the nano-products， these nano-units， such as nanoparticles， nanoclusters， nanowires and nanorods， can also self-assemble into the novel structural aggregates by several routes， including electron irradiation deposition [19]， chemical vapor deposition [20]， laser vaporization-condensation [21]， charge transferring [22]， an organic reagent-assisted method [23]， solution-liquid-solid method [24] and catalytic vapor-liquid-solid growth [25]. With these routes， various nanoscale or microscale aggregates can demonstrate novel architectures， including tree-like， web-like， spherical， nanowire-like， network and fishbone-like aggregates. As a well-known method for producing the nanocapsules， however， arc-discharge has been rarely used to synthesize the aggregates self-assembled by the nanocapsules prepared simultaneously in arc-discharge. Nevertheless， it is possible that the arc-discharge can be developed into a new way to synthesize the aggregates. In the present work， we utilized arc-discharge technique with modified strategies， involving changing the hydrogen pressure， introducing gadolinium - aluminum alloy ingot as the anode and adjusting the elements percent of the anode according to their evaporation pressure， to synthesize a new type of nanocapsules， with intermetallic compound GdAl2 as core and amorphous Al2O3 as shell， which enlarge the family of the magnetic nanocapsules. At the same time， the regularly aligned three-dimensional macro-aggregates self-assembled by the nanocapsules without any template and catalyst were simultaneously synthesized in arc-discharge process. 展開

機械翻譯!!: 13.本系列儀器采用電流、電壓雙組取樣并經單片處理后顯示，其讀數直觀、準確。由于儀器采用了負載四線制取樣，從面消除了負載導線電阻對電顯示的影響。電路的電壓限幅，使得實驗更加安全，可靠。 16.采用古埃法（gu-ai method）研究分子結構，測量順磁和逆... 13.本系列儀器采用電流、電壓雙組取樣并經單片處理后顯示，其讀數直觀、準確。由于儀器采用了負載四線制取樣，從面消除了負載導線電阻對電顯示的影響。電路的電壓限幅，使得實驗更加安全，可靠。 16.采用古埃法（gu-ai method）研究分子結構，測量順磁和逆磁磁化率。主要結構有：電磁鐵和恒流電源、數字式高斯計（霍爾效應）、安培計和伏特計、配有照明系統的控制盤。系統采用了PID電子調節，全數字電源（0~10A無級調節），無需水冷卻，使得儀器動礦層運行更加穩定可靠，防止因操作不當而造成儀器損壞。 34. 本儀器由光學系統和信號處理系統兩部分組成，它根據光拍頻原理設計，通過光電轉換檢測，在普通示波器上同時觀察和比較兩束光的波形和相位，測量光程差和位相差，求得光速。采用新的分頻、觸發措施，能在示波器上觀察到精確、清晰的波形。 35.本裝置用霍爾效應的原理測量螺線管軸向磁場強度分布。能判斷半導體載流子的符號，移開螺線管，可做共軛線圈實驗。此裝置由測定儀和專用電源兩部分組成，實驗儀上裝有螺線管、霍爾元件、二維移動標尺及IM，IH，VH轉換開關。專用電源提供霍爾元件工作電流IH，螺線管勵磁電流IM以及對霍爾電壓VH的測量。電流和電壓的測量均采用3 1/2位數顯表，測量精度高。翻出來后我再給分!一定會追加分!Z少50分!! 展開

幫忙翻譯: AttachingtheSampleChuckYouwillneeda#2Phillipsscrewdriverforthisstep.FollowingthedetailsshowninFig.2-4，installthesamplechuckbyfirstaligningthepinsonthebottomofthesamplechu... Attaching the Sample Chuck You will need a #2 Phillips screwdriver for this step. Following the details shown in Fig. 2-4， install the sample chuck by first aligning the pins on the bottom of the sample chuck with the receptacles on the alpha- SE base. Then tighten the upper two captive thumb screws. Next， use the Phillips screwdriver to tighten the lower two captive screws. Don’t over tighten the screws! It will make it difficult to remove them in the future; just ensure that the screws are snug. Finally， connect the vacuum line from the sample chuck to the vacuum fitting on the alpha-SE base. Releasing the Z-stage Shipping Lock To access the Z-stage shipping lock， first loosen the captive screw on the lamp/shipping lock access door， then open the access door by rotating 180°， as shown in Fig. 2-5. To release the Z-stage shipping lock， stand in front of the ellipsometer and use your left hand to balance the weight of the Z-stage (you will feel it lift up slightly). It will be difficult to release the shipping lock if you apply too much or not enough upward force. Next， use your right hand to move the shipping lock to the operating position (to the right， see Fig. 2-6). If the lock is hard to move， you can use a tool to gain more leverage. The shipping lock will move about 1/3” [8mm] to the right. Checking the Lamp Check that the QTH lamp in fully seated in the lamp housing. The lamp is located behind the actuator screw (see Fig. 2-6) and has two white wires protruding from the back of the lamp. Simply push down on the lamp ensuring that the lamp is fully seated in the lamp housing. Rotate the lamp/shipping lock access door to the closed position and hand tighten the captive screw. 拒絕翻譯軟件，翻譯軟件我自己也會用不是用翻譯軟件我就看不懂，只是，上來找人翻譯就是希望翻譯出比較容易看懂，不需要自己對照就可以看的說明書，如果用翻譯軟件，根本就詞不達意，還是要自己對著原文件核實 既然用了那么多積分，就希望有相當?shù)某晒?，如果用翻譯軟件混積分，那就是人品問題了還有，某些人不要不懂亂說混積分展開

求助翻譯: 問題一：請問“在GF254硅膠板上，取樣點板，在254nm紫外光下觀察結果”這句話該如何翻譯？ZD是不知道“取樣點板”怎么翻譯問題二：麻煩高手幫忙翻譯一下2Results2.1柱色譜分離結果The... 問題一：請問 “在GF254硅膠板上，取樣點板，在254 nm紫外光下觀察結果” 這句話該如何翻譯？ ZD是不知道“取樣點板”怎么翻譯問題二：麻煩高手幫忙翻譯一下 2 Results 2. 1 柱色譜分離結果 The results of separation by column chromatography 柱色譜分離過程中，氯仿∶甲醇95∶5和90∶10洗脫出來的流分經過反復的硅膠柱色譜分離純化得到組分C3。 2. 2 薄層色譜檢測結果 The results of Thin-layer chromatography. 組分C3在GF254硅膠板上展開后，可在254nm紫外燈下直觀觀測為單點，見圖1。 2. 3 GX液相色譜分析和制備單體化合物對組分C3 進行GX液相制備，色譜圖顯示有4個色譜峰(見圖2) ，分離效果較好，收集4個單峰組分，得到4個化合物1～4，對以上4個化合物進行GX液相分析，均為單峰，見圖3～4。 3 化合物的結構鑒定通過制備液相收集得到4個化合物，對其中3個化合物進行結構鑒定: 化合物1，淡黃色晶體， UV λmax nm (logε) : 248 nm。E IMS，m / z 501. 3 [M + 1 ] + ，分子量為500?；衔?氫譜顯示7個甲基信號;δ1. 02， 0. 93， 0. 78 ( each 3H， s) ， 0. 89 ( 3H， d， J =6. 4Hz) ， 1. 23， 1. 25 ( each 3H， d， J = 5. 2Hz) ， 1. 22(3H， s) ，一個連氧碳上的氫信號δ3. 23 (1H， dd， J= 10 Hz) ，符合三萜化合物的結構，可以證明化合物1為三萜類化合物。化合物2， UV λmax nm ( logε) : 250 nm。E IMS，m / z 515. 3 [M + 1 ] + ，分子量為514?；衔?的氫譜顯示7個甲基信號δ0. 77， 0. 94， 1.01， 1. 22， 1. 23 (3H， s) ， 0. 82 (3H， d， 10. 2 Hz) ，一個連氧碳上的氫信號δ3. 22 ( 1H， dd， J = 10. 5Hz) ，一個甲氧基上的氫信號δ3. 66 (3H， s) ，符合三萜化合物的結構，可以證明化合物2為三萜化合物。化合物3， UV λmax nm ( logε) : 254 nm。EIMS，m / z 531. 2 [M + 1 ] + ，分子量為514?；衔? 的氫譜(見附錄)顯示7 個甲基信號δ0.78， 0. 82， 0. 87， 1. 03， 1. 24， 1. 31 ( 3H， s) ， 1. 17(3H， d， 6. 6 Hz) ，一個乙?；系臍湫盘?hào)2. 10(3H， s) ，一個甲氧基團的氫信號3. 68 (3H， s) ，符合三萜化合物的結構，可以證明化合物3為三萜化合物。化合物4結構較復雜，不能確定是三萜化合物。二樓的辛苦了，非常感謝你的回答。不過好像沒有明白我的意思，而且有g(shù)oogle之嫌。展開

請問“電凝聚”這個物理名詞如何翻譯？: 十萬火急，請大家多多幫忙?。?！... 十萬火急，請大家多多幫忙！?。? 展開

DNA是如何轉錄翻譯表達合成蛋白質:

cyanopropylphenylpolysiloxane如何翻譯，是氣相色譜柱的一個固定相: 如題

高分求高手翻譯，不要機械翻譯: Bimetallic dendrimer-encapsulated nanoparticles(DENs)are important materials，because they have demonstrated improvement in performance compared to the monometallic DENs in many systems when they are used as catalysts.This tutorial review fo... Bimetallic dendrimer-encapsulated nanoparticles(DENs)are important materials，because they have demonstrated improvement in performance compared to the monometallic DENs in many systems when they are used as catalysts.This tutorial review focuses on the recent research advances in bimetallic DENs with respect to their synthesis，characterization，and applications as catalysts.Bimetallic DENs can be made mainly via three routes:co-complexation，sequential loading，and partial displacement.The research in bimetallic DENs has been significantly promoted by the advancement of characterization instruments.The performances of bimetallic DENs as homogeneous and heterogeneous catalysts in organic synthesis have been compared with both monometallic DENs and their physical mixtures.It is concluded that the synergistic electronic effect in bimetallic nanoparticles enhances their catalytic activities. 能翻譯多少都可以的展開

軟件翻譯和人工翻譯哪個好:

白度翻譯能不能拍照翻譯古文？:

chinct怎么翻譯: chinct怎么翻譯

4月突出貢獻榜

推薦主頁

reducer如何翻譯？

聯系我們

關注我們