急?。abview 英文幫助的翻譯只要信號發生器和示波器

悶*型丶Man 2009-06-06 02:42:36 442 瀏覽

跪求哪位大俠給個labviewHTL幫助的翻譯，只要信號發生器和示波器的部分??！在線等！有的直接發到我郵箱，小弟不勝感激！lennon868@tom.com不弄這個HTML的了，只要是說LABVIEW信號發生... 跪求哪位大俠給個labview HTL幫助的翻譯，只要信號發生器和示波器的部分??！在線等！有的直接發到我郵箱，小弟不勝感激！ lennon868@tom.com 不弄這個HTML的了，只要是說LABVIEW信號發生器方面的文獻就行，中文5000字左右沒人能給嗎。。。無奈啦，呼喚哪位大俠來拯救下有的直接發我郵箱，立馬加分展開

參與評論

評論

登錄后參與評論

全部評論(1條)

Lisa_YeLeaon 2009-06-07 00:00:00

設計性實驗以下 2 個試驗為設計性實驗，實驗一作為作業完成并上交程序，上交作業的程序只要求完成實驗要求中 2.1要求的內容，實驗要求中 2.2 的內容及實驗二可以作為有興趣的同學練習。實驗一超低頻信號發生器的設計 1．引言信號發生器在測量中應用非常廣泛，它可以產生不同頻率的正弦信號、方波、三角波、鋸齒波等，其輸出的幅值和直流偏置也可以根據需進行調節。信號發生器種類繁多，專用信號發生器是專門為某種特殊的測量而研制的，如電視信號發生器、編碼脈沖信號發生器等；通用信號發生器按輸出波形可分為正弦信號發生器、脈沖信號發生器、函數發生器和噪聲發生器等，其中正弦信號發生器Z具普遍性和廣泛性。本實驗通過編寫適當?shù)?LabView 程序，實現一個超低頻信號發生器，希望學生學習一些用虛擬儀器設計軟件通過適當?shù)挠布崿F(xiàn)虛擬信號發生器的知識。 2．實驗要求 2.1 請用 LabVIEW 設計、制作一個超低頻信號發生器。該信號發生器可以產生正弦信號、三角波、方波、鋸齒波信號。指標如下：頻率范圍：0.001Hz～10Hz 幅值：0～2V，可選直流偏置：0～2.25V，可選 2.2 請選擇合適的數／模轉換硬件板卡或者模塊，用 LabView 的信號發生函數產生模擬信號。該信號發生器可以產生正弦信號、三角波、方波、鋸齒波信號。指標如下：頻率范圍：0.001Hz～100Hz 幅值：0～2V，可選直流偏置：0～2.25V，可選 3．實驗提示 3.1 軟件開發環境可采用虛擬儀器開發環境 LabView。 3.2 LabView 的數字信號處理模板也包含信號發生函數進入 Functions 模板 Analyze》Signal Processing 子模板。其中 Signal Generation（信號發生）用于產生數字特性曲線和波形。圖 91 LabVIEW 信號處理函數子模板 3.3 具有數模轉換功能的板卡或者模塊可以被用來作為儀器硬件實現模擬信號的輸出，如美國國家儀器公司(NI)以及臺灣研華等有多種可選擇的基于 PCI 的板卡，國內多家公司開發的基于 USB 的數據采集和數模轉換模塊等。這些板卡和模塊一般都提供 LabVIEW 的驅動程序。選擇硬件時要選擇具有模擬信號輸出通道的板卡或模塊，ZD要考慮的參數有模擬信號數據通道的信號輸出范圍、數模轉換的精度、模擬信號輸出的頻率等。有興趣的同學還可以查閱資料自己設計數據采集和數模轉換模塊。 4．注意事項 1．輸出的模擬信號幅度不要超出所選擇硬件的輸出信號幅度。 5．參考文獻 [1]劉君華主編.基于 LabView 的虛擬儀器設計.北京：電子工業出版社，2003。 [2]陸綺榮主編.電子測量技術.北京：電子工業出版社，2003。 [3]LabJack U12 User’s Guide， LabJack Corporation， Version1.03，2002。 [4]李念強等，虛擬雙通道任意波形發生器的設計方法，自動化與儀器儀表， 2001，No.4，p2022 [5]王宏，虛擬儀器技術及虛擬示波器和信號源的構建，蘭州鐵道學院學報， Vol.19，No.3，2000，6，p5961 [6]陳客松，一種虛擬儀器概念的任意波形發生器的研制，儀表技術，2000，No.6，p1113 6．附錄 6.1 信號發生器面板設計示例面板設計要求具有開關、頻率選擇旋鈕、頻段選擇按鈕、波形選擇按鈕、直流偏置電壓選擇旋鈕、波形幅度旋鈕等，同時還要有產生波形的頻率顯示以及波形顯示。如下圖。進一步的設計還可以包括占空比選擇旋鈕、初始相位選擇旋鈕等。如果選擇的硬件具有兩路模擬信號輸出通道，有興趣的同學可以設計兩路信號發生器。圖 9－2 用 LabVIEW 設計的信號發生器面板示例 7．思考題 ① 如何改進該信號發生器的設計使輸出信號幅度不受選定數模轉換硬件能輸出信號幅度的限制？ ② 如果要求信號發生器可以輸出任意波形，如何改進信號發生器的設計？實驗二網絡化虛擬遠程開關控制器的設計 1．引言隨著網絡帶寬的不斷提高，網絡化虛擬測控系統將是自動測控系統的發展方向。將因特網和計算機軟硬件產品相結合，把網絡技術和虛擬儀器相結合，構 成網絡化虛擬儀器系統 是虛擬儀器的發展方向之一。 Internet 的出現和爆炸式的增長、網絡技術更新之快令人目不暇接?；?于 TCP/IP 的網絡 化智能儀器通過嵌入式 TCP/IP 軟件，使現場變送器或儀器直接具有 Intranet/Internet 功能。他們與計算機一樣，成為了網絡中的獨立節點，很方便地就能與Z近的網絡通信電纜直接連接，直接將現場測試數據上網。這樣測試數據就可以通過網絡實現數據共享。網絡化虛擬儀器改變了以往測試技術的面貌，可以使用戶遠程監控測控過程和試驗數 據，實時性非常好；通過網絡，一個用戶可以遠程監控多個過程，而多個用戶也能同時對一個過程監控；通過網絡，我們能夠有效地遠程控制儀器設備，在任何地方采集，在任何地方分析，在任何地方顯示。網絡化虛擬儀器將隨著網絡技術的發展而進一步發展。本實驗通過網絡化虛擬遠程開關控制器的制作，希望學生學習一些對網絡化虛擬儀器的設計的知識。 2．實驗要求 2.1 請設計、制作一個遠程電燈開關控制器。遠程客戶通過 TCP/IP 協議遙控服務器端所連接開關狀態（閉合或斷開）來控制電燈的亮滅。 3．實驗提示 3.1 可以基于 TCP/IP 協議采用 Client/Server 模式（客戶／服務器模式）來進行設計，通常集散控制系統多采用這種結構。它一般有多個客戶端來采集數據，而通常有一個服務器充當數據庫的角色，客戶端通過通信協議把測試數據寫入到遠程服務器數據庫。需要分兩部分設計，一個是客戶端數據采集程序和數據遠程發布程序的設計，一個是客戶端數據接收程序的設計。 3.2 服務器端編程時需要監聽 TCP 連接請求的到來，并不斷掃描指定的 TCP 端口，查看客戶端的寫入命令，根據這個命令是斷開開關還是閉合開關而執行相應的操作，程序結束時關閉連接。 4．注意事項 1、必須首先運行服務器端的程序，后運行客戶端的程序。 5．參考文獻 [1]劉君華主編.基于 LabView 的虛擬儀器設計.北京：電子工業出版社，2003。 [2]陸綺榮主編.電子測量技術.北京：電子工業出版社，2003。 [3]姜志玲等，虛擬儀器的網絡化，微計算機應用，Vol.24，No.1，2003，1，p1618 [4]龔海燕等，網絡化虛擬儀器，實用測試技術，2003，No.3，p3739 [5]楊春燕等，網絡測量系統及組建，電測技術，Vol.37，No.414，2000，p2729 [6] 朱孝勇等，基于網絡的遠程虛擬儀器及其應用，江蘇大學學報， Vol.24，No.3，2003，p7983 [7] 何嶺松等，基于 WEB 的網絡化虛擬儀器技術及應用， ZG機械工程， Vol.13，No.9，2002，p759761 6．思考題 ① 通過瀏覽器／服務器模式(B/S 模式) 是否可以實現相同的虛擬開關控制器？ ② 如何用 DataSocket 技術實現功能相同的虛擬開關控制器？

贊(13)

回復(0)

評論

評論
登錄后參與評論

登錄或新用戶注冊

微信登錄
密碼登錄
短信登錄

請用手機微信掃描下方二維碼
快速登錄或注冊新賬號

微信掃碼，手機電腦聯動

注冊登錄即表示同意《儀器網服務條款》和《隱私協議》

熱門問答

急！！labview 英文幫助的翻譯只要信號發生器和示波器: 跪求哪位大俠給個labviewHTL幫助的翻譯，只要信號發生器和示波器的部分！！在線等！有的直接發到我郵箱，小弟不勝感激！lennon868@tom.com不弄這個HTML的了，只要是說LABVIEW信號發生... 跪求哪位大俠給個labview HTL幫助的翻譯，只要信號發生器和示波器的部分??！在線等！有的直接發到我郵箱，小弟不勝感激！ lennon868@tom.com 不弄這個HTML的了，只要是說LABVIEW信號發生器方面的文獻就行，中文5000字左右沒人能給嗎。。。無奈啦，呼喚哪位大俠來拯救下有的直接發我郵箱，立馬加分展開

急求翻譯請幫忙翻譯一下這篇英文資料，急用?。。?！: Wells-BrookfieldCone/PlateRapidDeterminationOfAbsoluteViscosityIntroductionTheWells-BrookfieldCone/PlateViscometergivesresearchersasophisticatedinstrumentforroutinelydete... Wells-Brookfield Cone/Plate Rapid Determination Of Absolute Viscosity Introduction The Wells-Brookfield Cone/Plate Viscometer gives researchers a sophisticated instrument for routinely determining absolute viscosity of fluids in small sample volumes. Its cone and plate geometry provides the precision necessary for development of complete rheological data. Principle of Operation The Wells-Brookfield Cone/Plate Viscometer is a precise torque meter which is driven at discrete rotational speeds. The torque measuring system， which consists of a calibrated beryllium-copper spring connecting the drive mechanism to a rotating cone， senses the resistance to rotation caused by the presence of sample fluid between the cone and a stationary flat plate. The resistance to the rotation of the cone produces a torque that is proportional to the shear stress in the fluid. The amount of torque is indicated either on a dial or digital display， depending on model. This reading is easily converted to absolute centipoise units (mPa.s) from pre-calculated range charts. Alternatively， viscosity can be calculated from the known geometric constants of the cone， the rate of rotation， and the stress related torque. See Range Tables The correct relative position of cone and plate is obtained by following a simple mechanical procedure without the need for external gauges or supplementary instrumentation. The stationary plate forms the bottom of a sample cup which can be removed， filled with .5 ml to 2.0 ml of sample fluid (depending on cone in use)， and remounted without disturbing the calibration. The sample cup is jacketed and has tube fittings for connection to a constant temperature circulating bath. The system is accurate to within ?.0% of the working range. Reproducibility is to within ?.2%. Working temperature range is from 0oC to 100oC. 展開

怎樣用labview控制示波器和信號發生器。儀器說明書我都有，謝謝！:

急?。。。?！高分懸賞（100分，還可加）英文論文翻譯~: 標題：TwoRF/MicrowaveSoftwareProgramsUsedinTandemStreamlinetheDesignofPowerThisarticledescribesaprocedureforthedesignanddevelopmentofpoweramplifiersusingharmonic-balanced... 標題：Two RF/Microwave Software Programs Used in Tandem Streamline the Design of Power This article describes a procedure for the design and development of power amplifiers using harmonic-balanced software in tandem with impedance matching network synthesis software. For this purpose a particular design problem will be discussed. 這是文章的開頭部分，還有結尾部分，如果這個文章覺得可以翻譯的話，留下郵箱或qq號，我發文章過去，翻譯完滿意就給分，絕不含糊：）展開

翻譯以下英文：: The standard error of the mean (SEM) is a measure of how far your sample mean is likely to be from the true population mean. The SEM is calculated by this equation:SEM=SD/N. With large samples， the SEM is always small. By itself， the SEM i... The standard error of the mean (SEM) is a measure of how far your sample mean is likely to be from the true population mean. The SEM is calculated by this equation:SEM=SD/N. With large samples， the SEM is always small. By itself， the SEM is difficult to interpret. It is easier to interpret the 95% confidence interval， which is calculated from the SEM. 展開

急求英文高手翻譯一段摘要有關夾具設計的: Abstract In this paper， the general situation of research on agile fixture design is summarized and the achievements and deficiencies in the field of case-based fixture design are pointed out. There are no correlative case bases and match... Abstract In this paper， the general situation of research on agile fixture design is summarized and the achievements and deficiencies in the field of case-based fixture design are pointed out. There are no correlative case bases and matching mechanisms during the period from establishing the fixture planning to designing the fixture in currently used case-based fixture design systems. Thus a great amount of experience of fixture design is wasted and cannot be re-used， which reduces design efficiency and violates the original intention of case-based reasoning methods. In order to realize agility of fixture design， including re-configurability， re-scalability and re-usability， in this paper， a re-configurable agile fixture element base and an element assembly relation base are established. Using these two bases， the fixture structure is function-based decomposed， which makes it easy for an agile fixture to be re-configured and modified. Furthermore， a whole case-based agile fixture design model is presented， in which three modules are introduced， including the evaluation of the similarity of fixture planning， conflict arbitration and the modification of an agile fixture case. The three modules can be used to solve a problem where experience and design results cannot be re-used in the process of fixture design. Against the agile fixture design model， the evaluation method is put forward to evaluate the similarity in various phases. However， a similar case in the base could not generally meet the actual requirement and resolve the conflict between the similar case and the actual condition. Thus three methods， including a local restriction-relaxed method， a function-based conflict arbitration method and a case-based conflict arbitration method， are presented to clear up the conflict and could be used to modify the case to obtain an approach to a design result. Finally， an agile fixture design example is presented. The result demonstrates that the case-based agile fixture design approach can improve re-usability and design efficiency. Keywords: Agile fixture design; Case-based reasoning; Modeling 展開

labview基本信號發生器: 請問下面圖中幾個元件分別代表什么??？急求啊。... 請問下面圖中幾個元件分別代表什么??？急求啊。展開

智能信號發生器。。。。。。翻譯哈~~~~~~單獨翻譯啊哈，智能信號發生器~~: 設計了基于單片機AT86S52和MAX038的信號發生器，用于產生頻率和幅度均可程控調節的正弦波，矩形波和三角波信號。MAX038函數發生器配以少量外圍器件負責產生波形，波形再經過運放電路輸... 設計了基于單片機AT86S52和MAX038的信號發生器，用于產生頻率和幅度均可程控調節的正弦波，矩形波和三角波信號。MAX038函數發生器配以少量外圍器件負責產生波形，波形再經過運放電路輸出。主控器件AT89S52負責波形種類選擇，頻率調節，輸出幅度調節，液晶顯示，鍵盤操作等各個模塊的工作展開

數據采集的英文怎么翻譯？:

翻譯英文~專業類的: Whilegraphene，acarbon-basedtwo-dimensionalnanomaterials，hasreceivedanupsurgeofinterest，[1]self-assemblyofsmallorganicandorganometallicmoleculesinto2Dnanostructurescouldal... While graphene， a carbon-based two-dimensional nanomaterials， has received an upsurge of interest，[1] self-assembly of small organic and organometallic molecules into 2D nanostructures could also be harnessed to develop new classes of functional supramolecular nanomaterials.[2] In principle， quasi-2D lamellae or nanosheets are planar structures having a thickness less than 100 nm and lateral dimensions a few orders of magnitude greater than their thickness. Control over the bilateral intermolecular noncovalent interactions is anticipated to organize small molecules into regular 2D nanostructures， which has been a formidable challenge yet to be achieved. Recently， Shelnutt and co-workers obtained discrete porphyrin nanosheets reprecipitated from their solutions;[3] Sathish and co-workers constructed hexagonal C60 nanosheets using a liquid–liquid interfacial precipitation method;[4] the groups of Yao[5] and Hu[6] prepared singlecrystalline nanosheets of polycyclic aromatics using a surfactant- assisted reprecipitation and a physical vapor transporting method， respectively; and Zhang and co-workers suggested that molecules with intramolecular charge-transfer dipole moments could be grown into quasi-2D nanostructures.[7] Moreover， some amphiphiles and organogelators were found to self-organize into sheet-like nanostructures in contact with solvents.[8] Despite these advances， templateand surfactant-free synthesis of free-standing， crystalline， and optoelectronically active nanosheets from small molecules remains elusive. 展開

求翻譯英文文獻: 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the ... 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the samples were determined by JEM-2100F (JEOL) coupled with an energy-dispersive X-ray spectroscopy (EDX， Phoenix) system. Wide-angle and low-angle X-ray powder diffraction (XRD) of the as-obtained samples were recorded on a Rigaku D/max-2500 with Cu Kα radiation (λ = 1.540 56 ?) operated at 40 kV and 200 mA. Raman measurements were performed using a DXR from Thermo Scientific with a laser wavelength of 532 nm. To calculate the pore size distribution and pore volumes， the nitrogen absorption and desorption isotherms were measured at 77.3 K with an Autosorb-1 specific surface area analyzer from Quantachrome. The content of N in N-doped porous carbon was determined by NHC elemental analysis using Flash EA 1112. Thermogravimetric (TG) analysis of S/C composite was performed on TG/DTA 6300 in an N2 flow to obtain the S content in the composite. A four-contact method was applied to measure the powder electronic conductivity of porous carbons. The powder sample was pressed to disk at 4 MPa with two stainless-steel plungers， whose resistance was measured by a Keithley 2400 digital multimeter in fourwire mode. The conductivity of the sample was calculated according to the resistance and the size of the disk. Information of the surface elements was obtained by X-ray photoelectron spectroscopy (XPS) performed on the Thermo Scientific ESCALab 250Xi using 200 W monochromatic Al Kα radiation. The 500 μm X-ray spot was used for XPS analysis. The base pressure in the analysis chamber was about 3 × 10?10 mbar. All reported data of XPS binding energy are calibrated based on the hydrocarbon C 1s line at 284.8 eV from adventitious carbon. Spectra were fitted with Lorentzian?Gaussian functions and smart background using Thermo Avantage software. 展開

求助，英文文獻翻譯！: 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified ... 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified by distillation under reduced pressure; potassium persulphate (K2S2O8， initiator， Shanghai Lingfeng Chemicals) was of chemical grade. Silane coupling agent A174 (γ-methacryloxypropyltrimethoxysilane) was purchased from Shanghai Yaohua Factory. Polyvinylchloride (PVC， WS-1000S) was supplied by Shanghai Chlor-Alkali Chemical Co.， Ltd. Fig. 1 Morphology of untreated CaCO3 nanoparticles. Fig. 2 Morphology of PMMA-coated CaCO3 nanoparticles. 2.2 PMMA emulsion polymerization on CaCO3 nanoparticles 2.2.1 Surface silanation of nano-CaCO3 particles The nano-CaCO3 particles were homogeneously dispersed in ethanol (solid content 20%) by a sonication dispersion equipment. The slurry was then heated to 80°C with stirring， and the silane coupling agent A174 (5%， calculated based on the weight of nano-CaCO3 particles) was added into the slurry. After the slurry was stirred for 120 min at 80°C， it was filtered and the filter cake was then dried at 120°C in low vacuum for 120 min to obtain silanated CaCO3 powders. 展開

求助，英文文獻翻譯~: PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al... PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al. (2001) studied the relationship between the coating thickness of PMMA on the surface of talc and mechanical properties of PMMA-g-talc/PVC composites， and found that there existed a critical thickness. Xie (2001) found that the PMMA coating on talc improved the dispersion of talc in the PVC matrix and enhanced the interfacial adhesion between talc and PVC. There appears to be a critical coating thickness of PMMA on the talc surface for optimum toughening. Quan et al. (2002) reported improved toughness and intension of the PVC composites filled with CaCO3/ACR core-shell complex particles prepared by in-situ emulsion polymerization of acrylic ester. In the present work， PMMA coated on the surface of CaCO3 nanoparticles by in-situ emulsion polymerization was characterized by FT-IR and 1H-NMR. The effects of PMMA thickness and particle fraction on the mechanical properties of PMMA-coated CaCO3 /PVC nanocomposites were also investigated. 展開

LabVIEW英文怎么念:

示波器 SWPVAR 翻譯:

關于Labview的英文論文或者書籍，有沒有中英文對照的文章？急~: 要做畢業設計，老師要我們交課題相關的英文資料的翻譯，我的是關于Labview的，大家?guī)蛶兔Π?，急~~~Z好是中英文都有的謝謝了... 要做畢業設計，老師要我們交課題相關的英文資料的翻譯，我的是關于Labview的，大家?guī)蛶兔Π?，急~~~ Z好是中英文都有的謝謝了展開

金相切割機控制系統的英文怎么翻譯: 金相切割機控制系統的英文怎么翻譯？

函數信號發生器和示波器有什么區別?:

信號發生器和示波器為什么要做到阻抗匹配？:

4月突出貢獻榜

推薦主頁

急?。abview 英文幫助的翻譯只要信號發生器和示波器

聯系我們

關注我們

急?。abview 英文幫助的翻譯 只要信號發生器和示波器

聯系我們

關注我們

急?。abview 英文幫助的翻譯只要信號發生器和示波器