誰能幫我把這篇文章下下來，上海理工的，聲法膠體Zeta電位的測量

GhostTownz 2012-09-24 03:58:09 546 瀏覽

參與評論

評論

登錄后參與評論

全部評論(6條)

王尼瑪要春晚了 2012-09-25 00:00:00

復制可以的

贊(2)

回復(0)

評論

評論
登錄后參與評論
琴珊越 2012-09-25 00:00:00

愛莫能助

贊(5)

回復(0)

評論

評論
登錄后參與評論
寂寞硬男 2012-09-25 00:00:00

你告訴我一下期刊名字卷名或者作者名字光這個不好下

贊(3)

回復(0)

評論

評論
登錄后參與評論
swaki001 2012-09-25 00:00:00

抄嘛，掃描也可以撒，或者直接剪切！

贊(12)

回復(0)

評論

評論
登錄后參與評論
sgq好好的 2012-09-25 00:00:00

說一下具體作者，期刊名稱，年月用你給的信息查到的是上海理工大學動力工程學院的碩士畢業論文順便留意下郵箱

贊(18)

回復(0)

評論

評論
登錄后參與評論
你永遠贏不了1 2012-09-25 00:00:00

是不是上海理工大學龔智方的《電聲法膠體Zeta電位的測量》？這可是一篇碩士論文啊！購買這篇論文是要花不少錢的！

贊(12)

回復(0)

評論

評論
登錄后參與評論

登錄或新用戶注冊

微信登錄
密碼登錄
短信登錄

請用手機微信掃描下方二維碼
快速登錄或注冊新賬號

微信掃碼，手機電腦聯動

注冊登錄即表示同意《儀器網服務條款》和《隱私協議》

熱門問答

誰能幫我把這篇文章下下來，上海理工的，聲法膠體Zeta電位的測量:

膠體電池的zeta電位多少合適:

電位法誰能解釋下啊:

誰能幫我翻譯下這片文章？翻譯的好的在追加100分?。?！: Experimental Method All experiments were carried out in a high-pressure CO2 apparatus (Speed-SFE from Applied Separations) (see Figure 1) with a 300-mL extractor designed for a maximum pressure of 690 bar and a maximum temperature of 2... Experimental Method All experiments were carried out in a high-pressure CO2 apparatus (Speed-SFE from Applied Separations) (see Figure 1) with a 300-mL extractor designed for a maximum pressure of 690 bar and a maximum temperature of 250 °C. The volume of the extractor had to be reduced to 50 mL by a metallic cylinder， which tightens to the extractor wall， because as preliminary tests showed the equilibrium cell has to be completely filled with material. Otherwise， diffusion is the limiting factor and time for reaching equilibrium was too long. The extraction vessel was filled with compressed CO2 by an air-driven pump at closed outlet valves and under static conditions， which means desired pressure and temperature; the cell was incubated for 15 h， maintaining these conditions to reach equilibrium. In preliminary experiments the equilibrium time of 15 h was determined to reach equilibrium. CO2 Sampling. At equilibrium a CO2 phase sample is taken by opening the outlet valve and expanding a certain amount of CO2-substance mixture into a cooling trap filled with toluene， which has the highest solubility for the measured substances under atmospheric conditions. The pure gaseous CO2 passes a rotameter， showing the actual flow rate， and a gas flowmeter for determining the expanded CO2 amount. The content of the cooling trap was filled up with toluene to 30 mL and analyzed by a gas chromatographic method using an electron capture detector (GC-ECD). With the mass of expanded CO2 and composition of the cooling trap solubility at a certain pressure and temperature was calculated. Sampling was repeated four times at a given pressure and temperature and the standard deviation was lower than 5%. Gas Chromatographic Method. The tolueneflame retardant mixture of CO2 sampling was analyzed in a gas chromatograph (HP 5890 Serie II) with an ECD using a capillary column (type HP-1， 12 m 0.2 mm 0.2 ím). The injector temperature was held constant at 290 °C and the detector temperature at 300 °C. The oven temperature was held constant at 290 °C. Calibration with different amounts of HBCD and TBBA in toluene has been done before determining the linear range of calibration line and retention time of substances 展開

ZETA電位的測量方法:

ZETA電位的應用:

ZETA電位的介紹:

你好，請您把我翻譯一下這篇文章，謝謝！: 以鈦酸四正丁酯為鈦源，F(xiàn)e(NO3)3·9H2O為Fe摻雜源，HCl為水解YZ劑，自制覆蓋有摻F SnO2薄膜的載玻片為載體，用一步水熱合成法制備了摻Fe（摩爾分?jǐn)?shù)，以下等同）為2%、3%、4%和5%的摻雜TiO2。經X射線能譜儀（EDS）和掃描電鏡（SEM）測試，樣品含有微量的Fe元... 以鈦酸四正丁酯為鈦源，F(xiàn)e(NO3)3·9H2O為Fe摻雜源，HCl為水解YZ劑，自制覆蓋有摻F SnO2薄膜的載玻片為載體，用一步水熱合成法制備了摻Fe（摩爾分?jǐn)?shù)，以下等同）為2%、3%、4%和5%的摻雜TiO2。經X射線能譜儀（EDS）和掃描電鏡（SEM）測試，樣品含有微量的Fe元素，樣品表面積比較大的一維納米線結構；以1000W 汞燈為光源，20mg/L 50mL的甲基橙為光催化對象作光催化性能測試，結果表明，摻雜后的TiO2比未摻雜的光催化活性強，且摻Fe為4%樣品的光催化活性Z高；以摻F導電玻璃（FTO）為載體，摻Fe量3%、4%的樣品為活性物質制備成敏化太陽能電池光陽極，并組裝成CdS敏化太陽能電池，測試了I-V特性及交流阻抗（EIS），結果表明，摻Fe量為4%的電池光電性能Z好，比未摻雜的短路電流（SCC）提高了19.5%，效率提高了28.7%。展開