全部評論(5條)
-
- lwuyuting 2013-08-13 00:00:00
- 物理性質
-
贊(10)
回復(0)
-
- yahu666 2013-08-13 00:00:00
- 吸附性是物理性質!!
-
贊(7)回復(0)
-
- 竟說大實話0318 2013-08-13 00:00:00
- 物理變化；吸附性指的是可以吸收周圍介質中其他物質的分子，比如活性炭具有吸附性可以消除異色和異味，就是吸收了。
-
贊(6)回復(0)
-
- 麗婧婧子 2013-08-13 00:00:00
- 吸附性是物理性質，吸附的作用力是四大基本作用力中的電磁相互作用。 另外，要提醒的是，凡是涉及化學性質的要考慮其化學變化，而化學變化又涉及到物質之間的轉化（基礎教育定義化學反應為有新物質生成），顯然吸附性與物質之間轉化無關。 本人原創，希望采納！
-
贊(8)回復(0)
-
- v9hcc8ycy8 2013-08-12 00:00:00
- 這個要分情況考慮 凈水廠利用活性炭凈化水，是利用其多孔特性，是物理吸附; 而生石灰干燥 吸附，其吸附了水，二氧化碳，產生了如下反應： CaO+H2O=Ca(0H)2 Ca(0H)2+C02=CaCO3+H2O 這是化學反應。 不懂請追問，沒啥問題就采納吧，謝謝啦。
-
贊(7)回復(0)
熱門問答
- 吸附性是什么性質？物理?化學/?
2013-08-11 01:40:36
862
5
- 氯氣性質，物理的和化學的
- 氯氣性質，物理的和化學的
2009-04-30 17:38:05
639
3
- 誰知道化學中濾紙的性質是什么，
2013-10-13 11:13:32
389
1
- 土壤化學的土壤電荷性質
2018-11-23 06:39:09
305
0
- 銀子的吸附性
- 這個問題我問過物理，化學，中醫的老師。不過沒有得到滿意的答案：不舒服的人，用雞蛋白把銀子一起包起來燙皮膚。銀子會跟著變色：先是淺黃、再是金、變藍、后是紅色，如果再用顏色飽和的銀燙下去，銀子色澤又慢慢變淡變白。 我的想法是：銀子本來有獨特... 這個問題我問過物理，化學，中醫的老師。不過沒有得到滿意的答案：不舒服的人，用雞蛋白把銀子一起包起來燙皮膚。銀子會跟著變色：先是淺黃、再是金、變藍、后是紅色，如果再用顏色飽和的銀燙下去，銀子色澤又慢慢變淡變白。 我的想法是：銀子本來有獨特的吸附性，而蛋白的蛋白質和人體差不多，起了個介質的作用呀。謝謝你的回答呀~~ 展開
2013-08-26 08:30:19
557
1
- 點燈發光是什么變化？（物理或化學，請說明原因）
2013-07-24 04:01:30
486
1
- 稀有氣體通電發光后是什么變化，是化學還是物理，
2014-03-09 03:03:22
1479
4
- 聚氨酯泡沫物理和化學特性
- 1.沸點范圍2.熔點范圍3.閃點4.密度5.空氣中的可燃（爆炸）上限（體積%）6.空氣中的可燃（爆炸）上限（體積%）7.氧化特性8.氣壓9.水溶性10.分配系數（正辛醇/水）11.黏度12.蒸汽密度13.蒸發密度14.燃點溫度
2016-02-26 23:35:05
621
1
- 吸附性，為什么屬于物理性質？
- 強調一下，為什么？Z好是淺顯易懂
2009-12-02 01:10:22
1114
5
- 為什么茶葉具有吸附性
2013-12-14 07:45:05
443
5
- 納米材料為什么會有吸附性？
- 書本上說是因為表面積增大而引起的可我還是搞不 明白.
2017-09-29 18:13:13
511
1
- 化學與生物傳感器的性質參數有哪些
2016-12-31 05:20:47
496
1
- 化學中非金屬及其化合物有什么性質？
- 如題... 如題 展開
2018-11-16 03:57:36
352
0
- 溫度傳感器生物、化學、還是生物和化學、還是物理傳感
2017-05-23 00:13:35
448
2
- 激光器的性質是什么？
2011-10-28 07:51:32
491
1
- PH6是什么性質的
2009-09-08 21:49:45
388
3
- 化學高手請告訴我：/醛、酮、羧酸/三者之間的關系
- 越詳細越好！答案好的會有加分
2007-11-01 09:19:53
450
5
- 化學專業英語·翻譯·謝\(^o^)/YES！
- Fig. 1 illustrates the microstructure and surface morphology of samples which include the bare substrate， the fluorinated with and without CeO2 thin film. Fig. 1a shows the initial surface state of the polished bare substrate. Some fine ste... Fig. 1 illustrates the microstructure and surface morphology of samples which include the bare substrate， the fluorinated with and without CeO2 thin film. Fig. 1a shows the initial surface state of the polished bare substrate. Some fine steaks resulting from the polishing progress are visible in the image. The surface is considerably rough and the activity of surface for magnesium alloy is various from sample to sample and within the same sample due to the presence of different phases [24，25]. In Fig. 1b， the micrograph was taken when the sample was fluorinated in the 20% HF for 20 h. There are a large number of pores and cracks on the surface of this sample; however， we cannot find the presence of remarked grinding scratches originated from the sample preparation on the surface in contrast with the bare substrate. It is well known that the magnesium alloy reacts with HF to form the fluoride coating via displacement reaction and the fluoride is insoluble， thus form a barrier on the surface of magnesium alloy. The pores and cracks distributed uneven also suggest that the activities on the surface of magnesium alloy are not very identical. The SEM image of the fluorinated sample with CeO2 thin film is shown in Fig. 1c. As can be seen from this image， most of the pores and cracks existed on the surface of the fluorinated sample have disappeared which is ascribed to the presence of CeO2 thin film. Moreover， the surface of CeO2 thin film is more uniform and more compact than that of the fluorinated sample， and this may explain why this kind of samples is the best corrosion resistant. XPS analysis is performed aiming at identifying the chemical composition of the film and the typical survey scan spectra are shown in Fig. 2. The main element peaks of Mg， C， O， F and Ce are shown in the spectra. A significant amount of carbon is present on the surface of the sample due to some contaminant that originates from the polishing， cleaning and heat-treatment procedure; moreover， there may be some remnant since the deficiently burning for celloidin during the heat-treatment. There are three peaks in the survey scan spectra as follows: Mg 2p3/2 at about 50 eV， Mg 2s at about 88 eV and Mg Auger peak at about 301 eV. The peak of Mg 2p around 50 eV is shown in Fig. 2 which reveals only one peak at 50.2 eV belonging to Mg 2p being the fingerprint for Mg2+ in the transitional region. Hence， it is most probable that the presence of Mg in the coating is a result of the formation of MgF2 in the course of the fluorinated process and the formation of MgO during the heat-treatment. Both the main components of O 1s peak located at 530.6 eV and the F 1s peak located at 684.7 eV give the evidence that the major states are MgO and MgF2. It is found that almost a pure Ce(IV) state in the spectrum of CeO2 and this is similar to these reported by ?koda et al. [26]. 展開
2009-03-30 12:58:40
426
1
- 石墨烯 怎么證明 化學接枝 物理混合
2017-05-16 09:32:18
319
1
- 誰知道有關竹纖維的物理，化學性能
- 越快越好，今天晚上，急急急急急急急急急急......... 越快越好，今天晚上，急急急急急急急急急急...... 展開
2008-10-17 19:27:24
452
2
4月突出貢獻榜
推薦主頁
最新話題
滬公網安備 31011502008050號
參與評論
登錄后參與評論