| | | |
| <![CDATA[<kbd id="wyy2q"><tfoot id="wyy2q"></tfoot></kbd>]]> |
<![CDATA[<kbd id="wyy2q"><tfoot id="wyy2q"></tfoot></kbd>]]><![CDATA[<noscript id="wyy2q"></noscript>]]><![CDATA[<center id="wyy2q"></center>]]>
| | <![CDATA[<noscript id="wyy2q"><button id="wyy2q"></button></noscript>]]>
資料庫
旋轉式鼓式干燥器操作手冊
-
本文由 久貿貿易廣東辦事處 整理匯編
2024-09-15 23:01 735閱讀次數
文檔僅可預覽首頁內容，請下載后查看全文信息！
-
立即下載
旋轉式鼓式干燥器操作手冊
登錄或新用戶注冊
請用手機微信掃描下方二維碼
快速登錄或注冊新賬號
微信掃碼，手機電腦聯動
更多資料
-
旋轉式鼓式干燥器操作手冊- 旋轉式鼓式干燥器操作手冊[詳細]
-
2024-09-15 23:01
安裝說明
-
膜式干燥器使用指南- ●正確使用膜式干燥器是非常重要，否則會導致膜損害或者膜性能下降。
●為了避免事故或設備損壞，請?jiān)谑褂弥白屑?xì)閱讀本手冊。
●如果遇到本手冊無法解決的問題,請聯系供貨商。
●使用時請不要超過每個模組的技術參數限制
●請將模組安裝在通風良好的地方。
●安裝模組的環境溫度請保持在 55℃(131℉)一下。
[詳細]
-
2024-09-14 06:54
操作手冊
-
- 實驗室器具干燥器/清潔器具干燥器 清潔器具干燥器
- 實驗室器具干燥器/清潔器具干燥器 清潔器具干燥器[詳細]
-
2012-06-27 00:00
操作手冊
-
- SMC冷凍式干燥器現貨及資料
- SMC空壓機/干燥機簡介：IDFA-E系列冷凍式空氣干燥機使用冷媒R134a(HFC)3E,4E,6E,8E,11E,15E(進口空氣溫度：35℃)[詳細]
-
2018-11-08 10:00
產品樣冊
-
- 產品介紹 - 干燥器
- 產品介紹 - 干燥器[詳細]
-
2024-09-28 01:21
產品樣冊
-
- 表盤式粘度計（步進電機式）操作手冊
- 表盤式粘度計（步進電機式）操作手冊[詳細]
-
2014-07-11 00:00
報價單
-
- 管式爐操作手冊
- 管式爐操作手冊[詳細]
-
2008-07-18 00:00
課件
-
- 1088旋轉式自動進樣器
- 1088旋轉式自動進樣器[詳細]
-
2005-11-25 00:00
應用文章
-
- 旋轉式蒸發器 SYS-RE-3000D
- 旋轉式蒸發器/蒸發器/旋轉式蒸發儀 型號：SYS-RE-3000D用途簡介:旋轉式蒸發器是采用旋轉蒸發瓶(燒瓶)，增大蒸發面積在減壓下置于水浴中一邊旋轉，一邊加熱的裝置，使瓶?jī)?nèi)溶液擴散蒸發。是化學工業，醫藥工業，高等院校和科研實驗室等單位用于制造及分析實驗賴以濃縮，干燥，回收等較為理想的必備基本儀器。主機:蹺板式按鍵,快速自動升降,0-150毫米轉速:電子無級調速，20-200轉/分,功率40W加熱鍋:特氟隆復合鍋,全封閉加熱器,功率1.4KW溫度范圍:溫度自動控制,數字顯示水溫,室溫-90度總功率:1.5KW,電壓:-220V50HZ冷卻器:立式,耐高溫優質玻璃精制雙回流一體化標準口冷凝管套接標準口收集瓶加料器:閥門式加料管套接四氟乙烯管密封圈:氟橡膠真空密封墊圈特點：特氟隆水浴鍋，全透明防護罩，保溫，節能，防爆，防濺，防銹，防污染。要點介紹：蹺板式按鍵：蹺板上部下壓主機上升，蹺板下部下壓主機下降。帶環螺帽：順旋自動扣緊旋轉瓶，逆旋快速推卸旋轉瓶。四氟乙烯管和檔水流圈。無級調速用旋鈕。主機調正角度時：松開或鎖緊用旋鈕。[詳細]
-
2018-09-24 10:00
產品樣冊
-
- 旋轉式粘度計 FTD-NDJ-79
- 旋轉式粘度計/粘度計型號：FTD-NDJ-79一、儀器概述本儀器是適用于實驗室、工廠測量各種牛頓型液體的粘度和非牛頓型液體的表觀粘度的精密儀器。該粘度計可測定石油、樹脂、油漆、油墨、漿料、化妝品、奶油、藥物、瀝青等的粘滯性。對于不同粘度的液體或不同的測定要求可選用不同的測定單位進行測定。本粘度計具有體積小、重量輕、使用方便、維護簡單、經久耐用且能迅速可靠地測定液體粘度等特點。二、主要技術特點1、本儀器的驅動采用微型同步電動機，恒速旋轉，不受荷載和電源電壓變化的影響。2、配有兩種測試單元，每種單元包括一個測定容器和若干帶有轉軸的轉筒，滿足各試樣的測試要求。3、外型設計新穎，采用弧形刻度盤，讀數方便。三、主要技術指標和參數1、測量范圍：1～106mPas；2、測量誤差：±5%(對牛頓體)；3、測定器:分Ⅱ、Ⅲ單元；4、轉速：750r/min、75r/min、7.5r/min；5、電源：～220V50Hz；6、外形尺寸：170×140×440mm；7、儀器重量：15。[詳細]
-
2018-09-24 10:00
產品樣冊
-
- 氣流式霧化器和壓力式、旋轉式霧化器的區別
- 1.料液條件
氣流式：一般溶液、懸浮液、膏糊狀物料；
壓力式：一般溶液、懸浮液；
旋轉式：一般溶液、懸浮液；
[詳細]
-
2024-09-13 06:08
其它
-
- 氣流式霧化器與壓力式、旋轉式霧化器的區別
- 氣流式：一般溶液、懸浮液、膏糊狀物料；
壓力式：一般溶液、懸浮液；
旋轉式：一般溶液、懸浮液；[詳細]
-
2024-09-13 06:07
其它
-
- 連續式數字滴定器操作手冊
- 連續式數字滴定器操作手冊[詳細]
-
2011-08-22 00:00
期刊論文
-
- 20103 NDJ-5S旋轉式粘度計
- 20103 NDJ-5S旋轉式粘度計[詳細]
-
2010-06-18 00:00
實驗操作
-
- 20102 NDJ-5S旋轉式粘度計
- 20102 NDJ-5S旋轉式粘度計[詳細]
-
2010-06-18 00:00
標準
-
- 旋轉式縮分儀
- 旋轉式縮分儀[詳細]
-
2012-06-27 00:00
報價單
-
- 旋轉式壓片機英文版說明書
- XYP-5/7/9&XYP-5B/7B/9BRotaryTabletPressOPERATIONINSTRUCTIONTableofContents1.ScopeofApplication32.MainTechnicalParameters33.WorkingPrincipleandMainStructures44.Installation,AdjustmentandOperation55.ElectricalOperation66.Troubleshooting67.Lubrication78.Maintenance7PleasereadcarefullytheOperationInstructionbeforeinstallation,startingupandrepair,otherwise,anyinappropriateoperationnotrecommendedintheInstructionmaycauseabnormalconditionofthemachineorpersonalinjury.1.ScopeofApplicationThisisacompacttypeoftheautomaticrotationandcontinuoustabletpress,mainlyusedinthetechnicalresearchinpharmaceutical,chemical,food,electronicandotherindustries,anditisanimportantequipmentfordeterminingwhetherthegrainmaterialscanbepressedintotablets.Itisapplicabletopressingofgrainmaterialsavailabletobemadeintotablets(withintherangeofpressureofthemachine)withthepowdercontent(above100mesh)notmorethan10%.Itisapplicabletopressingofregular/irregularshapeandscoringtablets.Itisnotapplicabletosemi-solid,wetgrain,materialsoflowmeltingpointandeasilyabsorbingdampnessandpowderwithoutgrain.2.MainTechnicalParametersModelXYP-5/5BXYP-7/7BXYP-9/9BNo.ofturretpressdies(pair)579Maxoperatingpressure,KN40/6040/6040/60Max.tabletpressingdiameter,mm121212Max.tabletpressingthickness,mm666Max.feedingdepth,mm151515Max.tabletpressingoutput,0.91.261.6210,000tablets/hTurretoperatingdiameter,mm200200200Turretrotationspeed,turn/min0-300-300-30Middlepressdiediameter,mm262626Middlepressdieheight,mm222222Upper/lowerpressleverdiameter,mm222222Upper/lowerpressleverlength,mm115115115Visualdimension,mm480*635*1100480*635*1100480*635*1100Machineweight,kg260260260Motorpower,kw1.51.52.2Voltage,v2202203803.WorkingPrincipleandMainStructuresTurretstructure:Theturretisthemainoperationcomponentofthemachine,consistingofthelower/upperbearingassemblies,shaft,turret,etc.XXXpairsofpressdiesareuniformlydistributedonthecircumferenceoftheturret.Themomentistransmittedthroughtheflatpinbetweentheturretandtheshaft.Theshaftissupportedonthebearing,drivenbythewormpair,connectedwithsplinetodrivetheshaftandrotatetheturretforoperation.Trackmechanism:Therearethecylindricalcamandtheplanecamconsistingoftheuppertrackandthelowertrack,whicharethepathforthemovementoftheupperandthelowerpresslever.Theuppertrackiscomposedoftheupperpressupwardtrack,upperpressdownwardtrack,upperpressupperparalleltrack,upperpresslowerparalleltrack,pressingdowntrack,etc.,allsecurelyfixedonthetrackdisc.Thelowertrackiscomposedofthelowerpressupwardtrack,lowerpressdownwardtrackandthefeedingtrack,installedonthelowertrackseat.Feedingadjustmentdevice:Itislocatedinsidethemachinetoadjustthetabletweight.Themoon-shapedfeedingtrackwhichcanbeseenonthemachineplaneadjuststhefeedinuntwithitsriseorfallattheactionofthescrew.Theamountdecreaseswhenturningtherounddiscinclockwisedirectionandincreasesincounterclockwisedirection.Tabletthickness(pressure)adjustmentdevice:Thetabletthickness(pressure)isadjustedbymeansofadjustingthelowerpressingwheelupward/downward.Thelowerpressingwheelisinstalledinsidethemachine,buckledontheeccentricshaftanditsoutsideendconnectedonthehandwheel.Whentheoutsidehandwhellisadjusted,theeccentricshaftdrivesthepressingwheeltoriseorfall,andadjustthetabletthickness(pressure)andfurthercontrolthetabletthicknessandhardness.Theupperpressingwheelupward/downwardadjustmentcanalsobeusedasadjustmentdevice,butgenerallynotused.Feedingdevice:Itiscomposedofthefeedingbucket,adjustmentbolt,thefeeder,etc.Thefeederisamoon-shapedgrillefeeder,installedontheturret.Thespacingbetweenthefeederandtheturretoperatingsurfaceandtheheightofthebucketshallbeadjustedbasedonthegrainflowrate.Transmissiondevice:Itiscomposedofthemotor,synchronousbeltandwormreducer,commissioninghandwheel,etc.Themotorisinstalledonthemotorseatofthebaseplate.Whenitisstarted,thepoweristransmittedviaapairofbeltstothereducerwormpair,andthemotorrotationspeedisadjustedthroughtheACfrequencyconversionsteplessspeedadjustment.Whenopeningthetwosidesorthebackdoor,thesecomponentscanbedirectlyobservedandcontacted.Shell:Themachineshellisafull-closedtype,andconformstoGMPstandard.Theupperpartisenclosedwith4glasswindows,tofacilitatecleaningandmaintenance.Thelowerpartisclosedwiththestainlesssteeldoor,usuallylocked,andopenedonlyforrepairandinstallationofthepress.Anoperationconsoleisinstalledinfrontofthemachine.Thetabletpressingchamberandthedrivingpartofthemachineisseparatedwiththestainlesssteelenclosuretoensurethetabletpressingchamberiscleanandthedrivingcomponentsfreefrompowdercontaminationorcorrosion.4.Installation,AdjustmentandOperation4.1InstallationandAdjustmentofPressDiePreparationbeforepressinstallation:dismantlethematerialbucketandthefeeder.Opentherightdoor,rotatethehandwheeltocleantheturretoperatingsurface,pressholeandthepresstobeinstalled.Rotatethepressureadjustinghandwheeltoadjustthepressuretotheminimumlevel.Dismantlethelowerpressloading/unloadingtrack.Instal領themiddledie:Unscrewthemiddlepressfixingscrewabout1mmoutoftheoutercircleoftheturret,takecarenottocontactwiththepowdersuctionnozzleandotherparts,totheextendthemiddlepresswheninstal領shallnotcontactthetopofthescrew.Asthemiddledieisverytight,placeitstably,insertthesmashingrodintothepressholeandhammeritingently.Whenthemiddledieisinthediehole,itsplaneshallnotbehigherthantheturretplane,andfinally,tightenwiththescrew.Instal領theupperpress:Dismantletheinlaidtongue,inserttheupperpressleverintothehole,rotatethepressleverwiththethumbandtheindexfinger,tochecktheflexibilityoftheupward/downwardmovementoftheheadinthemiddledie,thereshallbenoclogging.Thenturnthehandwheeltothepresslevertocontacttheparalleltrack.Aftercompletingtheinstallationoftheupperpresslever,installtheinlaidtongue.Instal領thelowerpress:installasperthemethodfortheupperpress,andinstallthelowerpressontheloading/unloadingtrack.Commissioning:afterinstal領allthedies,turnthehandwheeltomaketheturretrotate2circles,observetheoperationoftheupper/lowerpressleversinthemiddledieholeandonthetracks.Thereshallbenocloggingorcollision.Payattentiontotheupmostpoint(i.e.tabletreleasepoint),itshallbe0.10.3mmhigherthantheturretoperationsurface.Closeallthedoors,startthemotortorunwithoutloadfor2minutes,andthemachinecanbeputintouseafterthenormaloperation.4.2Installationandadjustmentoffeeder:installthefeederonthecarriage,fixwiththeknurledscrew,thenadjusttheadjustingscrewtomakethespacingbetweenthefeederbottomandtheturretoperationsurfaceas0.050.1mm,andtightentheknurledscrew.Adjusttheheightofthepowderscrappingplatetomakethebottomplanealignedwiththeturretoperationsurface,thentightenwithscrew.4.3Adjustmentoffeedinunt:Itiscontrolledbytheadjustmenthandwheelinstalledattherightsideinfrontofthemachine,withtheindicationsymbolsatthesideofthehandwheel.Thefeedinuntdecreaseswhenthehandwheelrotatesintheclockwisedirection;andtheamountincreaseswhenthehandwheelrotatesinthecounterclockwisedirection.Thereshallbeenoughgrainsinthefeederwhenmakingtheadjustment,andtheadjustthepressuretoensurethesufficienthardnessofthetabletstofacilitatetheweighing.4.4Adjustmentoftabletthickness(pressure):Itiscontrolledbytheadjustmenthandwheelinstalledattheleftsideinfrontofthemachine,withtheindicationsymbolsatthesideofthehandwheel.Thetabletthicknessdecreases(thepressureincreases)whenthehandwheelrotatesinthecounterclockwisedirection;andthetabletthicknessincreases(thepressuredecreases)whenthehandwheelrotatesintheclockwisedirection.Whenthefeedinuntisadjusted,thethicknessandthehardnessofthetabletshallbecheckedandtheappropriatefineadjustmentshallbemadeuntilitiscomplied.4.5Powdersupplyadjustment:Uponadjustmentofthefeedinunt,adjustthegrainflow.Firstunscrewtheboltatthesideofthebucketcarriage,thenadjusttheadjustingboltonthebucketcarriagetoadjustthedistancefromthebucketmouthtotheturretoperationsurface,totheextendthestorageamountofgrainsatthefeedingmouthwillnotoverflow.Tightenwithscrewsaftertheadjustment.4.6Speedselection:Themethodforspeedadjustmentisverysimple.Therotationspeedshallincreasewhenturningtheadjustingbuttonintheclockwisedirection,andthespeedshalldecreasewheninthecounterclockwisedirection.Thekeypointistheselectionofthespeed,whichisdirectlyrelatedtotheservicelifeofthemachine,thetabletweightandquality.Astherearethedifferencesinthenature,viscosity,watercontentandthegraindiameterdistributionofthegrains,thetabletdiameterandthepressures,nouniformrequirementsaremadeforthespeedselection,whichcanonlybedeterminedaspertheactualsituationandtheexperienceofthetechnicalpersonnel.However,ingeneral,whenpressingthematerialswithhighercontentofmineralandplantfibers,inlargetabletdiameterorpooradhesiveness,itisbettertoadoptthelowspeedforpressingthetabletandthemaximumspeedcannotexceed25turns/minutes.Incontrast,whenpressingthematerialswithgoodadhesivenessandflowrate,insmalltabletdiameterandeasilymolded,thehighspeedcanbeadopted.Andtheoptimaltabletpressingspeedcanberealizedthroughtrialsandadjustments.Itisrecommendedthattherotationspeedforthecontinuouspressingshallnotexceed80%ofthemaximumratedrotationspeed.5.ElectricalOperationOperationpanelofconsole:Operationprocedures:Opentheswitchcabinetdoorandswitchonthepowersupply,andtheindicationlampontheoperationpanelison;pressRUNbutton,slowlyturnthefrequencyconversionbutton,andthespeedshallslowlyincrease.Whenemergencystopisrequired,pressSTOPbutton,andthemachineshallstopimmediately.Uponcompletionoftabletpressing,opentheswitchdoortoswitchoffthepower.6.TroubleshootingJitterofupper/lowerpressingwheel:wearofpressingwheelduetolackoflubrication.Incaseofslightwear,repairandaddlubricant;forseriouswear,replaceimmediately.Wearofuppertrack:Drywearfromlackoflubricant,causingslightdamageofthetracksurface,repairtimelyand,replaceitforseriouscases;Forthelubricationbetweenthetrackwithpoorenamelandthepresslever,thegreasecanbeusedforlubrication,30”geargreaseortheaircompressorgreasecanbeused,toapplyoncewiththebrushbeforestartingthemachine;Toomuchdusttocausethepressliftedandwearoftheuppertrack.Changethegrainproductionprocesstoensurethepowdercontentofgrain(above100mesh)notmorethan10%;IndicatoroftabletweightdifferenceWearorincorrectinstallationoffeeder.Ifworn,replacethefeeder;ifincorrectinstallation,makeadjustmenttimely;Problemofpressdie:checkthetotallengthofthelower/upperpresslever,ifexceedingtherangeoftolerance,stopusingit.7.LubricationForthelubricationofthegeneralcomponents,thereisanozzleonthesurfaceofthedeviceforfil領thelubricationoilorgreaseaccordingtothetypeoftheoilcup,onceateachtimeofstarting.Andlubricantscanbeaddedduringoperationaccordingtothetemperatureriseandtheactualoperation.Themechanicaloilcanbeaddedinthewormcabinet,generallyN46insummerandN32inwinter,andtheoilvolumeshallbeaddedtotheextendthewormgearisimmersedunderonetoothface,andtheoillevelcanbecheckedthroughthelevelglass.Changetheoilafteruseforabouthalfayear.Forthelubricationoftheuppertrackdisc,applythemechanicaloilwiththebrushpriortoeachtimeofuse.AdoptN32mechanicaloilforlubricationofthepressleverandthetrack,anddonotusetoomuch,toavoidingressofwasteoilintothegrainstocausecontamination.8.MaintenanceRegularlyinspectthecomponents,12timespermonth,includingtheworm,wormgear,bearing,pressingwheel,camshaft,upper/lowertracks,checkingtheflexibilityofthemovingpartsandthewear.Makerepairtimelywhendiscoveringanydefect;Afteroperationoruponshutdown,removetheunusedpowderandbrushofftheresidualpowderatallpartsofthemachine.Incaseofalongtimeshutdown,dismantlethepressdiesandcleanthemachinefully,applytheantirustoilonthesmoothsurfaceofthecomponentsandcoverwithclothshield;Maintenanceofthepressdiesshallbeconductedinthespecialbox.Immerseitfullyintheoil,andkeepitcleanandavoidrustandbruise.Bettertouseonespecialboxforeachtype,soastoavoidmixingandknowclearlythedamageorloss;Cleantheoperationarearegularly,inparticular,thereshallbenodustorflyingashinmanufactureofmedicalorfoodtablets;Makeregularlymaintenanceandinspectionoftheelectricalcomponentstokeepthenormalandsoundoperationcondition.Regularlycleantheaccumulateddustonthecoo領fanwithcompressedair;Keepthegoodworkingenvironment(temperatureandhumidity)oftheelectricalcomponentstoprolongtheservicelife;Maintenanceoftheelectricalcomponentsshallbeconductedbyprofessionaltechnicalpersonnel,especiallythefrequencyconverter,whichshallbesenttotheprofessionalmanufacturerforrepair;Beforemakingtheinsulationtestfortheelectricalcomponents,itisrequiredtodismantleallthemaincircuitcontrollineofthefrequencyconverter,toavoiddamagetotheconverterfromtheinsulationtest.Fortheindividualinsulationtesttothefrequencyconverter,pleaserefertotheoperationinstructionforfrequencyconverter.9.ListofRol領BearingandInstallationPositionDescriptionModelQuantityInstallationpositionSinglerowcentripetalballbearing1081pcsShaftSinglerowconicalrollerbearing71051pcsShaftSinglerowthrustballbearing82101pcsTurretSinglerowthrustballbearing83081pcsTurretSinglerowthrustballbearing81041pcsWormshaftSinglerowthrustballbearing81061pcsWormshaft更多詳情信息可聯系客服[詳細]
-
2018-11-17 10:00
產品樣冊
-
- 旋轉鼓型氙燈試驗箱產品樣冊
- 旋轉鼓型氙燈試驗箱產品樣冊[詳細]
-
2016-10-18 14:40
安裝說明
-
- GB/T15723-1995 實驗室玻璃儀器 干燥器
- GB/T15723-1995實驗室玻璃儀器干燥器了解詳情，請點擊：http://www.hongda17.cn北京鴻達天矩試驗設備有限公司專業生產研發：高低溫試驗箱.恒溫恒濕試驗箱.溫度沖擊試驗箱.電熱鼓風干燥箱等試驗設備；歡迎選購！[詳細]
-
2018-08-19 10:00
產品樣冊
-
- SMC干燥器注意使用問題
- SMC干燥器注意使用問題SMC冷凍式干燥器IDF和IDU工作原理SMC干燥器IDFIDU干燥器冷凍式干燥器是利用冷媒與壓縮空氣進行熱交換，吧壓縮空氣冷卻至2~10℃的范圍，以除去壓縮空氣中的水蒸氣。左圖是帶后冷卻器以及自動排水器的冷凍式干燥器。潮濕的壓縮熱空氣，經風冷式后冷卻器后，進入熱交換器的外筒被預冷，再流入內筒被空氣冷卻器冷卻到壓力露點2~10℃。在此過程中，水蒸氣冷凝成水滴，經自動排水器排出。除濕后的冷空氣，通過熱交換器的外側，吸收進口側空氣的熱量，使空氣溫度上升。提高輸出空氣的溫度，可避免輸出口結霜，并降低了相對濕度。把處于不飽和狀態的干燥空氣從輸出口流出，供氣動系統使用。只要輸出空氣溫度不低于壓力露點溫度，就不會出現水滴。壓縮機將制冷劑壓縮以升高壓力，經冷凝器冷卻，使制冷劑由氣態變成液態。液態制冷劑在毛細管中膨脹氣化。氣化后的制冷劑進入熱交換器的內筒，對熱空氣進行冷卻，然后再回到壓縮機中進行循環壓縮。所使用制冷劑為氟利昂R134a和R22.容量控制閥是用來調節空氣冷卻器溫度的，以適應處理空氣量的變化或改變壓力露點。蒸發溫度計顯示壓縮空氣的露點溫度。SMC干燥器作用壓縮空氣經過后冷器器、油水分離器、氣罐、主管路過濾器得到初步凈化后，仍含有一定量的水蒸氣。氣動回路在充排氣過程中，元件內部存在高速流動處（如節流閥及換向閥內部的孔口處）或氣流發生絕熱膨脹處，溫度要下降，空氣中的水蒸氣就會冷凝成水滴，這對氣動元件的工作產生不利的影響。故有些應用場合，必須進一步清除水蒸氣。SMC干燥器就是用來進一步清除水蒸氣的，但不能依靠它清除油分。SMC冷凍式干燥器使用注意事項1）不要放置在日曬、雨淋、風吹或者相對濕度大于85%的場合。2）壓縮空氣進出口不要接錯。3）排水口不要向上立著，不要打著或壓扁。4）電源電壓允許波動小于±10%。5）壓縮空氣進口溫度過高、環境溫度過高（40℃以上）、使用流量超過額定處理空氣量、電壓波動超過±10%、通風太差（冬季也要換氣，否則室溫也會升高）等情況下，保護電路會發生作用，指示燈滅，停止運轉SMC干燥器分類SMC干燥器可以分為以下兩大類：1、SMC冷凍式干燥器（IDF和IDU系列）：利用冷媒與壓縮空氣進行熱交換，把壓縮空氣冷卻至2~10℃的范圍，以除去壓縮齊齊中的水分（水蒸氣成分）。IDF為標準型，IDU為高溫型；另外IDUS和IDFS為帶不銹鋼熱交換器型。2、SMC吸附式干燥器（ID系列）：利用其中的吸附劑對水分具有高壓吸附、低壓脫附的特性進行干燥。3、SMC高分子膜式干燥器（IDG系列）：利用高分子中空隔膜只讓水蒸氣通過，空氣中的氮?dú)夂脱鯕獠荒芡ㄟ^(guò)進行干燥。2、SMC冷凍式干燥器分類SMC冷凍式干燥器可以分為以下幾種類型：1、IDF為標準型冷凍式干燥器，壓縮空氣的進口溫度上限為50℃，不帶后冷卻器。2、IDU為高溫型冷凍式干燥器，壓縮空氣進口溫度上限為80~60℃，干燥器進口裝有風冷式后冷卻器。3、IDUS和IDFS為帶不銹鋼熱交換器型冷凍式干燥器，改善了防腐蝕性能，且流通能力增大40%，功率消耗減小38%，總尺寸也減小些。[詳細]
-
2018-09-29 10:00
產品樣冊
Copyright 2004-2026 yiqi.com All Rights Reserved , 未經書面授權 , 頁面內容不得以任何形式進行復制
在線留言
滬公網安備 31011502008050號
參與評論
登錄后參與評論