波譜英文文獻在哪里下載?

逍遙掌法 2010-12-08 02:02:14 441 瀏覽

參與評論

評論

登錄后參與評論

全部評論(3條)

_hippie10zl 2010-12-17 00:00:00

就輸入波譜英文去搜吧。先下載幾篇看看，就可以了。

贊(4)

回復(0)

評論

評論
登錄后參與評論
暴徒媳婦KKK 2010-12-09 00:00:00

ScienceDirect

贊(8)

回復(0)

評論

評論
登錄后參與評論
chenyuanhua18 2010-12-09 00:00:00

網上搜索 Unended Quest 無盡的探索波普自傳英文版就有

贊(2)

回復(0)

評論

評論
登錄后參與評論

登錄或新用戶注冊

微信登錄
密碼登錄
短信登錄

請用手機微信掃描下方二維碼
快速登錄或注冊新賬號

微信掃碼，手機電腦聯動

注冊登錄即表示同意《儀器網服務條款》和《隱私協議》

熱門問答

波譜英文文獻在哪里下載?:

求翻譯英文文獻: 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the ... 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the samples were determined by JEM-2100F (JEOL) coupled with an energy-dispersive X-ray spectroscopy (EDX， Phoenix) system. Wide-angle and low-angle X-ray powder diffraction (XRD) of the as-obtained samples were recorded on a Rigaku D/max-2500 with Cu Kα radiation (λ = 1.540 56 ?) operated at 40 kV and 200 mA. Raman measurements were performed using a DXR from Thermo Scientific with a laser wavelength of 532 nm. To calculate the pore size distribution and pore volumes， the nitrogen absorption and desorption isotherms were measured at 77.3 K with an Autosorb-1 specific surface area analyzer from Quantachrome. The content of N in N-doped porous carbon was determined by NHC elemental analysis using Flash EA 1112. Thermogravimetric (TG) analysis of S/C composite was performed on TG/DTA 6300 in an N2 flow to obtain the S content in the composite. A four-contact method was applied to measure the powder electronic conductivity of porous carbons. The powder sample was pressed to disk at 4 MPa with two stainless-steel plungers， whose resistance was measured by a Keithley 2400 digital multimeter in fourwire mode. The conductivity of the sample was calculated according to the resistance and the size of the disk. Information of the surface elements was obtained by X-ray photoelectron spectroscopy (XPS) performed on the Thermo Scientific ESCALab 250Xi using 200 W monochromatic Al Kα radiation. The 500 μm X-ray spot was used for XPS analysis. The base pressure in the analysis chamber was about 3 × 10?10 mbar. All reported data of XPS binding energy are calibrated based on the hydrocarbon C 1s line at 284.8 eV from adventitious carbon. Spectra were fitted with Lorentzian?Gaussian functions and smart background using Thermo Avantage software. 展開

求助，英文文獻翻譯！: 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified ... 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified by distillation under reduced pressure; potassium persulphate (K2S2O8， initiator， Shanghai Lingfeng Chemicals) was of chemical grade. Silane coupling agent A174 (γ-methacryloxypropyltrimethoxysilane) was purchased from Shanghai Yaohua Factory. Polyvinylchloride (PVC， WS-1000S) was supplied by Shanghai Chlor-Alkali Chemical Co.， Ltd. Fig. 1 Morphology of untreated CaCO3 nanoparticles. Fig. 2 Morphology of PMMA-coated CaCO3 nanoparticles. 2.2 PMMA emulsion polymerization on CaCO3 nanoparticles 2.2.1 Surface silanation of nano-CaCO3 particles The nano-CaCO3 particles were homogeneously dispersed in ethanol (solid content 20%) by a sonication dispersion equipment. The slurry was then heated to 80°C with stirring， and the silane coupling agent A174 (5%， calculated based on the weight of nano-CaCO3 particles) was added into the slurry. After the slurry was stirred for 120 min at 80°C， it was filtered and the filter cake was then dried at 120°C in low vacuum for 120 min to obtain silanated CaCO3 powders. 展開

求助，英文文獻翻譯~: PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al... PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al. (2001) studied the relationship between the coating thickness of PMMA on the surface of talc and mechanical properties of PMMA-g-talc/PVC composites， and found that there existed a critical thickness. Xie (2001) found that the PMMA coating on talc improved the dispersion of talc in the PVC matrix and enhanced the interfacial adhesion between talc and PVC. There appears to be a critical coating thickness of PMMA on the talc surface for optimum toughening. Quan et al. (2002) reported improved toughness and intension of the PVC composites filled with CaCO3/ACR core-shell complex particles prepared by in-situ emulsion polymerization of acrylic ester. In the present work， PMMA coated on the surface of CaCO3 nanoparticles by in-situ emulsion polymerization was characterized by FT-IR and 1H-NMR. The effects of PMMA thickness and particle fraction on the mechanical properties of PMMA-coated CaCO3 /PVC nanocomposites were also investigated. 展開

納米材料英文文獻加翻譯:

UG編程軟件在哪里下載？: 想學習UG編程不知道在哪個網站可以下載

西門子編程軟件在哪里下載:

通信方面的英文文獻翻譯?。?: 以下是文獻的一部分，愿意幫忙的高手留下郵箱，我把文件發給你，若能完成，加分：SpatialCompressiveSensingApproachForFieldDirectionalityEstimation.I.INTRODUCTIONVarietyoft... 以下是文獻的一部分，愿意幫忙的高手留下郵箱，我把文件發給你，若能完成，加分： Spatial Compressive Sensing Approach For Field Directionality Estimation. I. INTRODUCTION Variety of techniques for field directionality estimation were studied in literature [1]-[5]. Thus， a theoretical analysis of the relationship between the hydrophone array output and the noise field was conducted in [1]-[5]. The developed techniques were based on the array beamformer output or the crossspectral matrix between outputs of array elements [4]-[5]. The problem of a field directionality estimation in ocean， using horizontal line towed array was also addressed in literature [5]- [8]. Recently， problems of direction of arrival and field directionality estimation for moving sensors arrays have attracted renewed interest [9]-[12]. It was shown that an array motion can improve an array performance assuming temporal coherence of successive samples [10]-[11]. In [12]， the wavefield sampling method that exploits the linear relationship between the noise field and the collection of beamformer outputs over various array orientations was proposed. It was shown that the wavefield sampling (WS) method outperforms other tested methods. This algorithm was implemented via the recursive estimation method and its convergence to the unique solution was promised for a specific set of array orientations and beamformer look directions. However， a method for a proper array orientation and beamformer look direction sequence selection remains an open question. The quality of the field directionality estimation is determined by the angular resolution. The higher angular resolution is， the more accurate estimation of the far field sources， and better detection performance can be achieved. One of fundamental relations in the array signal processing is that the angular resolution is directly proportional to the number of the array elements [13]. This relation motivates the desire for longer arrays that can achieve higher resolution. Unfortunately， the requirement contradicts the implementation and installation limitations that motivate shorter arrays. Moreover， implementation of longer arrays for maneuvering platforms such as unmanned underwater vehicles (UUV) can even be impossible [14]. These contradictions motivate the quest for alternative array signal processing methods. Usually， the field directionality is modeled as a finite set of strong far-field narrow-band sources and an isotropic lowpower noise [1]. In this work， the model of the field directionality is adopted in the following way. First， the bearing angle space is uniformly sampled into a large number of discrete angles. Next， it is assumed that ether the high energy that corresponds to the far-field strong sources or the low-energy that corresponds to the isotropic noise is received at the sensor array from every of these discrete azimuth angles. 展開

化工類英文科技文獻譯中文: There is a fair body of literature concerning the electroreduction of glucose. This has been reviewed by Fedoronko. He divided his review into the polarographic work and that done on solid electrodes. The polarographic studies form a cohere... There is a fair body of literature concerning the electroreduction of glucose. This has been reviewed by Fedoronko. He divided his review into the polarographic work and that done on solid electrodes. The polarographic studies form a coherent picture， in which the experimentally observed data， which take the form of a plateau， not diffusion controlled， are explained in terms of a rate-determining step of mutarotation from the cyclic (inactive) form of the sugar to the linear (electroactive) form. The process is known to be both acid and base catalyzed， and has been reviewed by Capon. It is generally assumed that no hydrogen evolution takes place in the polaro- graphic plateau region. 翻譯通順有加分！謝謝大家！不需要機器翻譯的！展開

西門子PLC編程軟件在哪里下載: 我想下載一個西門子的編程軟件請大俠們指教一下去哪里下載呀

sigmadelta 工具包可以在哪里下載:

SIM卡工具包在哪里下載: SIM卡工具包在哪里下載我的手機，SIM卡工具包，不小心被我刪除了，怎么辦

電腦上下載軟件在哪里:

labview dsc run-time在哪里下載？:

x射線計算器在哪里下載:

急求“紅外測溫控制系統”的英文文獻: 急求“紅外測溫控制系統”的英文文獻，Z好是非接觸，在線式的，基于單片機的，謝謝了！

標準物質的波譜圖在哪里可以找到？: 哪里可以找化學物質的波譜圖，網站或者告知相關數據庫均可

4月突出貢獻榜

推薦主頁

波譜英文文獻在哪里下載?

聯系我們

關注我們