“五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？
-
急用~~~“五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？大家知道得幫下忙哦~~... 急用~~~“五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？ 大家知道得幫下忙哦~~ 展開
全部評論(3條)
-
- 凡夫俗子蘇小瘋 2012-03-22 00:00:00
- Connector Cat5e
-
贊(5)
回復(0)
-
- 盅新烈寺刈剖 2009-02-19 00:00:00
- 5 types， super 5 types， six types of correspondences network cloth line links a parts
-
贊(11)回復(0)
-
- 白式少年o4WK 2018-04-07 00:00:00
- 5類纜要用Category 5或簡寫為Cat.5，布線專業用語為cabling。 Interconnection(或connection）components for Category 5， 5e， and 6 cabling in communications nwtwork
-
贊(16)回復(0)
登錄或新用戶注冊
- 微信登錄
- 密碼登錄
- 短信登錄
請用手機微信掃描下方二維碼
快速登錄或注冊新賬號
微信掃碼，手機電腦聯動
熱門問答
- “五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？
- 急用~~~“五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？大家知道得幫下忙哦~~... 急用~~~“五類、超五類、六類通信網絡布線連接部件”英文怎么翻譯？ 大家知道得幫下忙哦~~ 展開
- 數據采集的英文怎么翻譯？
- 用于連接超五類網線的接口
- 用于連接超五類網線的接口
- 翻譯以下英文：
- The standard error of the mean (SEM) is a measure of how far your sample mean is likely to be from the true population mean. The SEM is calculated by this equation:SEM=SD/N. With large samples， the SEM is always small. By itself， the SEM i... The standard error of the mean (SEM) is a measure of how far your sample mean is likely to be from the true population mean. The SEM is calculated by this equation:SEM=SD/N. With large samples， the SEM is always small. By itself， the SEM is difficult to interpret. It is easier to interpret the 95% confidence interval， which is calculated from the SEM. 展開
- 線距線寬怎么翻譯英文
- 金相切割機控制系統的英文怎么翻譯
金相切割機控制系統的英文怎么翻譯？
- 機床上光柵尺用英文怎么翻譯？
- 機床上光柵尺用英文怎么翻譯？
- 機床上光柵尺用英文怎么翻譯？
- 五分類血球分析儀的英文怎么翻譯
- 好象都是專業詞匯吧... 好象都是專業詞匯吧 展開
- 求翻譯英文文獻
- 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the ... 2.2. Material Characterizations. A field emission scanning electron microscope (SEM， JEOL 6701F) was used to investigate the morphologies， particle sizes of the samples. Transmission electron microscopy and elemental compositions of the samples were determined by JEM-2100F (JEOL) coupled with an energy-dispersive X-ray spectroscopy (EDX， Phoenix) system. Wide-angle and low-angle X-ray powder diffraction (XRD) of the as-obtained samples were recorded on a Rigaku D/max-2500 with Cu Kα radiation (λ = 1.540 56 ?) operated at 40 kV and 200 mA. Raman measurements were performed using a DXR from Thermo Scientific with a laser wavelength of 532 nm. To calculate the pore size distribution and pore volumes， the nitrogen absorption and desorption isotherms were measured at 77.3 K with an Autosorb-1 specific surface area analyzer from Quantachrome. The content of N in N-doped porous carbon was determined by NHC elemental analysis using Flash EA 1112. Thermogravimetric (TG) analysis of S/C composite was performed on TG/DTA 6300 in an N2 flow to obtain the S content in the composite. A four-contact method was applied to measure the powder electronic conductivity of porous carbons. The powder sample was pressed to disk at 4 MPa with two stainless-steel plungers， whose resistance was measured by a Keithley 2400 digital multimeter in fourwire mode. The conductivity of the sample was calculated according to the resistance and the size of the disk. Information of the surface elements was obtained by X-ray photoelectron spectroscopy (XPS) performed on the Thermo Scientific ESCALab 250Xi using 200 W monochromatic Al Kα radiation. The 500 μm X-ray spot was used for XPS analysis. The base pressure in the analysis chamber was about 3 × 10?10 mbar. All reported data of XPS binding energy are calibrated based on the hydrocarbon C 1s line at 284.8 eV from adventitious carbon. Spectra were fitted with Lorentzian?Gaussian functions and smart background using Thermo Avantage software. 展開
- 求助，英文文獻翻譯！
- 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified ... 2. Experimental 2.1 Materials Nano-CaCO3 particles (D50: 30?70 nm by TEM (Fig. 1) and BET: ca.17m2·g-1) were supplied by Shanghai Zhuoyue Nanotech Corporation. Methyl methacrylate (MMA， Shanghai Lingfeng Chemicals) was purified by distillation under reduced pressure; potassium persulphate (K2S2O8， initiator， Shanghai Lingfeng Chemicals) was of chemical grade. Silane coupling agent A174 (γ-methacryloxypropyltrimethoxysilane) was purchased from Shanghai Yaohua Factory. Polyvinylchloride (PVC， WS-1000S) was supplied by Shanghai Chlor-Alkali Chemical Co.， Ltd. Fig. 1 Morphology of untreated CaCO3 nanoparticles. Fig. 2 Morphology of PMMA-coated CaCO3 nanoparticles. 2.2 PMMA emulsion polymerization on CaCO3 nanoparticles 2.2.1 Surface silanation of nano-CaCO3 particles The nano-CaCO3 particles were homogeneously dispersed in ethanol (solid content 20%) by a sonication dispersion equipment. The slurry was then heated to 80°C with stirring， and the silane coupling agent A174 (5%， calculated based on the weight of nano-CaCO3 particles) was added into the slurry. After the slurry was stirred for 120 min at 80°C， it was filtered and the filter cake was then dried at 120°C in low vacuum for 120 min to obtain silanated CaCO3 powders. 展開
- 求助，英文文獻翻譯~
- PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al... PMMA has good compatibility with PVC due to specific interaction of a hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC (Belhaneche-Bensemra et al.， 2002; Ramesh et al.， 2002). Zhou et al. (2001) studied the relationship between the coating thickness of PMMA on the surface of talc and mechanical properties of PMMA-g-talc/PVC composites， and found that there existed a critical thickness. Xie (2001) found that the PMMA coating on talc improved the dispersion of talc in the PVC matrix and enhanced the interfacial adhesion between talc and PVC. There appears to be a critical coating thickness of PMMA on the talc surface for optimum toughening. Quan et al. (2002) reported improved toughness and intension of the PVC composites filled with CaCO3/ACR core-shell complex particles prepared by in-situ emulsion polymerization of acrylic ester. In the present work， PMMA coated on the surface of CaCO3 nanoparticles by in-situ emulsion polymerization was characterized by FT-IR and 1H-NMR. The effects of PMMA thickness and particle fraction on the mechanical properties of PMMA-coated CaCO3 /PVC nanocomposites were also investigated. 展開
- 翻譯英文~專業類的
- Whilegraphene，acarbon-basedtwo-dimensionalnanomaterials，hasreceivedanupsurgeofinterest，[1]self-assemblyofsmallorganicandorganometallicmoleculesinto2Dnanostructurescouldal... While graphene， a carbon-based two-dimensional nanomaterials， has received an upsurge of interest，[1] self-assembly of small organic and organometallic molecules into 2D nanostructures could also be harnessed to develop new classes of functional supramolecular nanomaterials.[2] In principle， quasi-2D lamellae or nanosheets are planar structures having a thickness less than 100 nm and lateral dimensions a few orders of magnitude greater than their thickness. Control over the bilateral intermolecular noncovalent interactions is anticipated to organize small molecules into regular 2D nanostructures， which has been a formidable challenge yet to be achieved. Recently， Shelnutt and co-workers obtained discrete porphyrin nanosheets reprecipitated from their solutions;[3] Sathish and co-workers constructed hexagonal C60 nanosheets using a liquid–liquid interfacial precipitation method;[4] the groups of Yao[5] and Hu[6] prepared singlecrystalline nanosheets of polycyclic aromatics using a surfactant- assisted reprecipitation and a physical vapor transporting method， respectively; and Zhang and co-workers suggested that molecules with intramolecular charge-transfer dipole moments could be grown into quasi-2D nanostructures.[7] Moreover， some amphiphiles and organogelators were found to self-organize into sheet-like nanostructures in contact with solvents.[8] Despite these advances， templateand surfactant-free synthesis of free-standing， crystalline， and optoelectronically active nanosheets from small molecules remains elusive. 展開
- 納米材料英文文獻加翻譯
- 總線模塊怎么布線
總線模塊怎么布線：確保高效穩定的系統連接
在現代工業和自動化控制系統中，總線模塊作為連接各個設備和單元的核心部分，扮演著至關重要的角色。正確的布線不僅能提升系統的穩定性和數據傳輸效率，還能減少故障和維護成本。本文將深入探討總線模塊的布線方法，幫助工程師們?cè)谠O(shè)計和實施時做到、可靠，從而保障整個系統的順暢運行。
總線模塊布線的重要性
總線模塊的布線方式直接影響到系統的性能與可靠性。如果布線不當，可能會導致信號干擾、數據丟失甚至設備損壞。因此，選擇合適的布線方法和配置，不僅可以確保數據傳輸?shù)姆€(wěn)定性，還能有效延長設備的使用壽命。
總線布線的基本原則
-
選擇合適的傳輸介質 總線模塊的布線選擇應根據信號類型和傳輸距離來決定。常見的傳輸介質包括雙絞線、光纖和同軸電纜等。對于較長的傳輸距離，光纖能夠有效減少信號衰減，而短距離則可以選擇雙絞線，成本較低且穩定性高。
-
避免電磁干擾 在布線過程中，避免與高壓電源線、強電磁場源（如電動機和變壓器）過于接近，防止電磁干擾（EMI）對總線信號的影響。可以通過采用屏蔽線纜或在布線時合理布局，減少外界干擾源的影響。
-
布線合理規劃 對于復雜的系統，布線前要進行詳細規劃。每個模塊的連接應盡量避免交叉或重復走線，合理布局能夠減少信號反射和串?dāng)_，從而提高系統的穩定性。并且，應該留有一定的空間，便于后期的維護和擴展。
-
保持接地良好 接地是布線過程中不可忽視的一環。合理的接地能夠減少系統中的噪聲干擾，保證信號的清晰傳輸。尤其是在高頻應用中，穩定的接地系統至關重要。
總線模塊布線的常見方式
-
星型布線 星型布線是將所有設備直接連接到一個中心節點，形成一個類似星狀的結構。這種布線方式適合于設備數量較少且需要高度集中的系統。優點是信號傳輸穩定，故障診斷簡單，但中心節點的故障可能導致整個系統癱瘓。
-
總線型布線 總線型布線是一種常見的方式，通過一根主線將各個模塊連接起來。每個模塊通過分支接入總線，形成一個線性網絡。適用于設備較多的系統，并且結構簡單，易于擴展，但線纜的質量和長度需要嚴格控制，以確保信號穩定。
-
環形布線 環形布線常用于冗余系統中，利用環形網絡連接各個模塊。在主線發生故障時，信號可以繞過故障區域，確保系統的持續運行。這種方式的缺點是布線復雜，成本較高。
布線中的常見問題與解決方案
-
信號衰減問題 長距離傳輸時，信號可能會出現衰減現象，尤其在高頻率信號傳輸中尤為明顯。為了解決這個問題，可以在布線時使用信號放大器，或選擇更高質量的傳輸介質，確保信號完整傳遞。
-
串?dāng)_和反射現象 串?dāng)_和信號反射是布線過程中常見的干擾現象。為了避免這些問題，應該使用屏蔽電纜，確保各條線路之間的物理隔離，減少信號互相干擾。
-
接頭松動問題 接頭松動會導致信號傳輸不穩定，甚至發生斷開。為避免這種情況，在布線時應使用高質量的接頭和連接器，并確保每個接頭都牢固安裝。
結語
總線模塊的布線是系統設計中的關鍵環節，關系到整個自動化系統的穩定性與可靠性。只有根據具體需求和環境，選擇合適的布線方式，并遵循科學合理的布線原則，才能確保系統長期高效運行。通過本文所介紹的布線方法和常見問題的解決方案，工程師們可以在實際應用中優化系統架構，提升設備性能，減少故障率，保障系統穩定運行。
-
- 地質雷達怎么布線
地質雷達怎么布線：專業指導與技巧
在地質勘探領域，地質雷達作為一種非破壞性檢測工具，廣泛應用于地下結構的調查與分析。為了確保地質雷達的測量數據準確且穩定，布線的科學性與合理性顯得尤為重要。地質雷達布線的好壞直接影響到測量效果和數據的質量，因而掌握正確的布線技巧是每個專業人員必備的技能。本文將深入探討地質雷達的布線方法、關鍵注意事項以及如何通過專業技巧確保雷達工作穩定，進而提升地質勘探的效率與精度。
一、地質雷達布線的基本原則
地質雷達布線的核心目的是確保雷達信號能夠順利傳輸，并且避免任何干擾源對測量數據的影響。在布線過程中，需要遵循以下幾個基本原則：
-
盡量避免長距離布線：長距離的布線容易導致信號衰減，因此，地質雷達系統布線時，應盡量縮短電纜的長度。若不可避免的需要長距離布線，則可以選擇信號放大器或者使用信號調節設備來補償信號的衰減。
-
布線路徑選擇：雷達電纜的布設應選擇較為平坦且干擾較少的路徑，避免雷達電纜穿越高壓電線、地下水管等設施。這樣的環境可能會對雷達信號造成干擾，影響數據的精度。
-
避免急劇彎曲：電纜的彎曲角度應盡量保持平緩，急劇彎曲會導致信號傳輸受阻，從而降低探測效果。在布設電纜時，應避免電纜出現明顯的銳角彎曲，保持布線路徑的順暢。
-
選擇合適的電纜：根據地質雷達的型號與工作頻率，選擇合適的電纜類型至關重要。高頻信號要求電纜有較低的衰減性能，保證信號的高效傳輸。
二、布線過程中的具體步驟
-
確認工作區域：在開始布線前，需要對工作區域進行全面的勘察。確認地下設施的布局，以及可能的干擾源，確保布線的路徑優化。
-
設置電纜固定點：為了防止電纜在工作過程中出現松動或拉扯，布線時需要合理設置電纜固定點。常見的固定方法有使用地面釘或支架將電纜固定在預定位置。
-
測試與調整：布線完成后，需要進行信號測試，檢查信號的強度與質量。如果信號不穩定，可能需要重新調整布線路徑或增加信號增強設備。
三、常見布線誤區與解決方法
-
電纜布置不平整：很多情況下，電纜未能按照規定的路徑進行平整布設，這會導致信號傳輸質量下降。解決方法是在布設時使用更為精確的測量工具，確保電纜路徑的規范。
-
忽視環境干擾：電纜穿越高壓線、地下管道等設施時，容易受到電磁干擾，影響測量結果。此時應選擇避開這些干擾源的路徑，或者增加屏蔽裝置來減少干擾影響。
-
電纜選擇不當：選擇與雷達設備不匹配的電纜，容易導致信號傳輸失真。選擇合適的電纜規格以及適配的接口非常重要，避免影響探測效果。
四、如何提升布線效率
-
團隊協作：地質雷達布線通常需要多人協作，合理分配工作任務，提前規劃布線路線，能大大提高布線效率。
-
使用專業工具：使用高質量的布線工具，如電纜測量?jī)x器、電纜拉線器等設備，可以有效提高布線的精確度與速度，減少人為操作失誤。
結語
地質雷達的布線是一個細致且專業的工作，要求工程人員具備扎實的技術功底與豐富的現場經驗。從布線的基本原則到具體操作細節，每一步都關系到探測結果的準確性與可靠性。通過精心設計和科學布局，可以大限度地提高地質雷達探測的效果，為后續的地質勘探提供堅實的數據支持。
-
- 電橋怎么布線
電橋怎么布線：全面解析電橋布線的要點與技巧
電橋布線在電氣工程中扮演著至關重要的角色，它是連接電氣系統、保證設備穩定運行的基礎。無論是電力設備的接入，還是在電氣實驗中電橋的使用，布線的規范性與合理性都會直接影響到系統的性能和安全。本文將深入探討電橋布線的關鍵步驟、注意事項以及常見的技術要點，幫助電氣工程師和技術人員準確把握電橋布線的核心要素，確保其在實際應用中的高效與安全。
電橋布線的基本概念與工作原理
電橋主要用于測量電阻、傳感器信號等電氣參數，其工作原理通常是通過精確的電路連接來比較已知電阻與被測電阻的差異，從而達到精確測量的目的。電橋布線的目標是保證電橋能夠穩定運行并實現準確的測量結果，因此布線的合理性對于電橋的性能至關重要。
電橋布線的準備工作
在開始布線之前，需要對電橋的各個部件進行詳細了解。電橋通常由四個電阻元件組成，這些元件的連接需要確保電路的平衡。要確認電源電壓的穩定性，避免電壓波動影響測量精度。選擇合適的導線和連接方式，確保信號傳輸?shù)目煽啃?，并預防干擾的影響。
電橋布線的步驟
-
選擇合適的電橋類型：根據測量的電氣參數不同，選擇適合的電橋類型，如惠斯頓電橋、 Kelvin 電橋等。不同類型的電橋適用于不同的測量需求。
-
電路連接：確保電橋四個電阻元件的正確連接，電源電壓應與電橋所需電壓相匹配。在連接過程中，要特別注意電橋的對稱性，確保信號源與測量端的電阻平衡。
-
接地與防干擾設計：在布線過程中，接地工作是非常重要的。必須保證電橋系統的接地良好，避免地電位差導致的信號干擾。要使用抗干擾措施，如屏蔽線、隔離電源等，確保電橋測量精度不受外界環境的影響。
-
測試與調校：完成電橋布線后，應進行系統測試，檢查電路是否正常，電阻元件是否正確連接。在測試過程中，根據需要進行電橋的微調，確保電橋的輸出與實際測量值一致。
常見問題與解決方案
-
電橋不平衡：出現電橋不平衡的情況，可能是因?yàn)殡娮柙B接不正確或存在接觸不良的情況。解決方法是檢查電阻的連接點，確保接觸良好，并排查所有接頭和導線的完整性。
-
電橋輸出信號不穩定：這種情況通常由電源電壓不穩定或外部電磁干擾引起?？梢酝ㄟ^(guò)穩壓電源和加強電磁屏蔽來解決。
-
測量誤差：如果測量值存在較大誤差，可能是由于電橋結構設計不當或校準不準確。需要對電橋進行重新校準，確保其工作在合適的參數范圍內。
結語
電橋布線不僅僅是一個簡單的連接過程，它要求工程師具備扎實的電氣基礎與精細的操作技能。在進行電橋布線時，每個細節都可能影響到終測量結果的準確性，因此務必遵循嚴格的技術規范，合理規劃每一條線路，確保系統穩定性和測量精度。通過科學的布線方式，能夠充分發揮電橋的作用，為電氣系統的正常運行提供有力保障。
-
- 求翻譯，除濕機功能按鈕英文！
- Z主要是模式那三個真的搞不明白。
- ？？？？？誰能幫我翻譯幾個英文——激光雷達？？？？？
- 關于激光雷達的論文 1、LO 2、header board 3、inductive beams
4月突出貢獻榜
推薦主頁
最新話題
滬公網安備 31011502008050號
參與評論
登錄后參與評論