高分懸賞,會人工英語翻譯的進~~~
-
AnalyticalMethodsofVolatileAnalysisManyanalyticalmethodshavebeenusedforthesamplingandisolationofvolatilecompoundsgeneratedduringlipidoxidation.Sampling,usingmethodssuchas... Analytical Methods of Volatile Analysis Many analytical methods have been used for the sampling and isolation of volatile compounds generated during lipid oxidation. Sampling, using methods such as extraction, headspace analysis, and solid-phase microextraction (SPME), offers a means to collect and often pre-concentrate volatiles from samples. Isolation allows the separation of the extracted volatiles and is often accomplished using gas chromatography (GC) or high-pressure liquid chroma- tography (HPLC). Aromatic compounds are produced in low con- centrations at the onset of lipid oxidation, thereby requiring a method that not only isolates the compounds, but concentrates them. In addition, food provides a complex matrix from which to extract the compounds. Several studies have addressed the bind- ing of lipid oxidation products to proteins (O’Keefe and others 1991; Gutheil and others 1992). These bound compounds need to be liberated before the oxidation products can be accurately quantified. Sample preparation can complicate the assessment of lipid oxidative status as a number of these lipid oxidation prod- ucts are thermally generated. Care must be taken to extract the compounds present in the sample while not generating additional oxidation products or allowing the volatile compounds to de- grade during the extraction process. The most common procedures reported in the literature for the determination of lipid oxidation products from muscle foods are GC methods. In this review, sampling methodologies of distillation and solvent extraction, and isolation methods associated with GC and HPLC analyses will be discussed. Within those gas chromato- graphic methodologies, static HS, dynamic purge-and-trap HS, and solid-phase microextraction (SPME) will be addressed. A summary of the different isolation methods is presented in Table 1. 只要翻譯的通順即可。雖然長了點,可是80分還是值得的吧 展開
全部評論(0條)
登錄或新用戶注冊
- 微信登錄
- 密碼登錄
- 短信登錄
請用手機微信掃描下方二維碼
快速登錄或注冊新賬號
微信掃碼,手機電腦聯動
熱門問答
- 高分懸賞,會人工英語翻譯的進~~~
- AnalyticalMethodsofVolatileAnalysisManyanalyticalmethodshavebeenusedforthesamplingandisolationofvolatilecompoundsgeneratedduringlipidoxidation.Sampling,usingmethodssuchas... Analytical Methods of Volatile Analysis Many analytical methods have been used for the sampling and isolation of volatile compounds generated during lipid oxidation. Sampling, using methods such as extraction, headspace analysis, and solid-phase microextraction (SPME), offers a means to collect and often pre-concentrate volatiles from samples. Isolation allows the separation of the extracted volatiles and is often accomplished using gas chromatography (GC) or high-pressure liquid chroma- tography (HPLC). Aromatic compounds are produced in low con- centrations at the onset of lipid oxidation, thereby requiring a method that not only isolates the compounds, but concentrates them. In addition, food provides a complex matrix from which to extract the compounds. Several studies have addressed the bind- ing of lipid oxidation products to proteins (O’Keefe and others 1991; Gutheil and others 1992). These bound compounds need to be liberated before the oxidation products can be accurately quantified. Sample preparation can complicate the assessment of lipid oxidative status as a number of these lipid oxidation prod- ucts are thermally generated. Care must be taken to extract the compounds present in the sample while not generating additional oxidation products or allowing the volatile compounds to de- grade during the extraction process. The most common procedures reported in the literature for the determination of lipid oxidation products from muscle foods are GC methods. In this review, sampling methodologies of distillation and solvent extraction, and isolation methods associated with GC and HPLC analyses will be discussed. Within those gas chromato- graphic methodologies, static HS, dynamic purge-and-trap HS, and solid-phase microextraction (SPME) will be addressed. A summary of the different isolation methods is presented in Table 1. 只要翻譯的通順即可。雖然長了點,可是80分還是值得的吧 展開
- 擠出機英語翻譯。。。在線等。高分懸賞
- Simplified Flow Theory for Screw Extruders The flow behavior of a viscous liquid in the channel of an extruder screw is shown to be similar to the flow behavior of viscous liquids between infinite parallel plates, one of which is station... Simplified Flow Theory for Screw Extruders The flow behavior of a viscous liquid in the channel of an extruder screw is shown to be similar to the flow behavior of viscous liquids between infinite parallel plates, one of which is stationary and the other moving. Assuming Newtonian behavior of the liquid, a differential equation was derived which relates the rate of extrusion and the die pressure to the screw and die geometry and to the operating variables. Integrated flow equations are given for the special case in which the viscosity of the liquid is constant throughout the screw channel (isothermal extrusion). Equations are also given for the case in which the dimensions of the screw channel are functions of their position along the length of the screw. IN THE preceding paper ( 1 )o f this symposium the literature pertaining to the problem of viscous flow in extruders was reviewed. In this paper the development of simplified but more useful flow equations is presented. The synibols and nomenclature used in this paper are defined in the preceding paper (1). The flow mechanism of the viscous liquid in the helical channel of the screw can be better understood if one imagines that the channel be unrolled and laid out on a flat surface. Figure 1 shows this concept of the screw channel. If the lower plate, representing the screw surface, is held stationary and the upper plate, representing the barrel surface, is moved in the direction of the arrow, the relative motions will be the same as those existing in an extruder where the barrel is stationary and the screw rotates. Assuming that the liquid wets both surfaces, the motion of the barrel drags the viscous liquid along with it, while the stationary plate exerts an equal and opposite drag. The velocity of the liquid, relative to the screw, is a maximum at the barrel surface and zero at the screw surface. There is also a directional factor involved, since the channel is inclined at angle p to the direction of motion. Therefore, in computing the flow rate in the channel we break up the velocity into two components: one of these acts directly down the channel, and the other acts at right angles to it. We call the component which acts down the channel drag velocity, and the component which acts at right angles to this transverse velocity. At the end of the channel there is generally a die or some other restriction to flow. This sets up a pressure gradient down the channel causing a flow in the reverse direction to the drag flon. There is one other flow that must be considered. Generally the screw does not fit perfectly inside the barrel. In other words, there is a clearance between the top of the screw threads and the barrel surface. 展開
- 有關大學化學的英語翻譯~進來看看。高分懸賞
- 3.1敵草隆吸附等溫線 圖 2a-c 展示了在沒有控制酸堿度的情況下,活性碳在不同溫度時對敵草隆的吸附量。從各圖可見,它們?cè)谘芯克婕暗臏囟确秶鷥?nèi)都很完整,覆蓋至大約 55 mmol L-1的范圍。在整個受測試的濃度范圍內,敵草隆的吸附量都隨著溫度顯著增加,因此... 3.1敵草隆吸附等溫線 圖 2a-c 展示了在沒有控制酸堿度的情況下,活性碳在不同溫度時對敵草隆的吸附量。從各圖可見,它們?cè)谘芯克婕暗臏囟确秶鷥?nèi)都很完整,覆蓋至大約 55 mmol L-1的范圍。在整個受測試的濃度范圍內,敵草隆的吸附量都隨著溫度顯著增加,因此,根據觀察所得,溫度對敵草隆吸附能力的影響,與Z常見的吸附趨勢不同。這種明顯的吸熱表現,是由于溶液中的敵草隆份子在溫度增加時更容易出現去溶劑化的情形,因而令敵草隆份子的平面性和擴散率都有所增加[10,11,27]。在diyi次進行時,圖 2a 的均衡等溫線屬于 L 類(更仔細而言則屬 Giles 分類法中的 L-3 分類 [12]),因而顯示出,敵草隆較低的水溶度和多層吸附現象令它有較好的吸附能力。該條等溫線diyi部份所呈現的坡度遞減,并在高處轉平的情形,是大部份稀薄溶液的常見吸附情形。這個模式代表可供吸附的表面被逐漸占用。雖然等溫線在高處轉平所展現的飽和情況被理解為是單層吸附完成的結果,卻不一定能顯示出一層排列緊密的吸附物本身的序列情況。該層吸附物也可以包含有溶劑的份子和吸附物的份子群,而且,它們除了吸附在原有表面的可吸附位置之外,也可以形成一定程度的多層吸附物,或者填塞在孔洞中。當?shù)葴鼐€在高處完全轉平的時候,溶解物的濃度會隨著溫度而減少,即在15攝氏度和45攝氏度時,濃度分別為約45mmol L-1至約 30 mmol L-1。在過去的論文中,F(xiàn)ontecha-Cámara 等人 [10] 曾經報導:敵草隆在酸堿度為 7 時,對活性碳纖維和布料的吸附量呈現 L 類等溫線;而 Bouras 等人 [9] 則報導敵草隆在酸堿度為 6 時,對于表面活性經過修改的柱狀粘土的吸附量呈現S類等溫線。因此,多層吸附物的形成,似乎是受到吸附面的性質影響,而另一項影響因素則是酸堿度對已吸附的溶解物和尚待吸附的溶解物之間互動作用的影響。 展開
- 高分懸賞 買個筆記本電腦
- 我想買個筆記本 主要選擇 戴兒 HP 聯想 1.價格在3000-5000 2.能玩游戲的 3.性能要好 散熱啊什么的 4.售后服務好點 別買了就當沒一回事了 買的時候么態度很好的 5.我根本不懂筆記本的 大家Z好詳細介紹 害人的 千萬別來
- 高分懸賞,關于各種建筑的結構
- 我需要下列物體的結構類型,連接方式,受力特點!! 柵欄,圓形陶瓷裝飾品,冰山,高層建筑的穹頂,玻璃鋼過蓋,竹排,汽車外殼,人的頭蓋骨,古羅馬斗獸場。 在線等,十萬火急??!1
- 酶的探索歷程!!超高分懸賞!來啊!
- 我需要知道在探索酶的過程中,有哪些科學家(包括國籍,他是什么學家,如物理學家或者化學家等等,時間,哪個世紀)做出了貢獻,做出了什么貢獻,(如果有記載他是怎么做的實驗?zāi)歉?hào)... 我需要知道在探索酶的過程中,有哪些科學家(包括國籍,他是什么學家,如物理學家或者化學家等等,時間,哪個世紀)做出了貢獻,做出了什么貢獻,(如果有記載他是怎么做的實驗?zāi)歉?hào))。 要全,不要只挑以前的或只挑現在的,我給你那么多分就是要你仔細的找,不要隨便糊弄我!! 展開
- 高分求 光學薄膜 物理 專業英語翻譯 有追加
- 翻譯 論文摘要 給出了部分關鍵詞 希望對你您有所幫助 也希望您對我有所幫助 呵呵 部分關鍵字: 帶通濾光片 近紅外 膜系設計 短波通 ZX波長 透射率 key words :pass-band optical filter; near infrared; film system design;short wave pass;centr... 翻譯 論文摘要 給出了部分關鍵詞 希望對你您有所幫助 也希望您對我有所幫助 呵呵 部分關鍵字: 帶通濾光片 近紅外 膜系設計 短波通 ZX波長 透射率 key words :pass-band optical filter; near infrared; film system design;short wave pass;central wavelength ;transmittance 翻譯正文如下: 摘要:隨著礦難的頻頻發生,瓦斯探測器的靈敏度越來越受到人們重視。 本文中的紅外吸收型甲烷檢測儀便具有選擇性強,靈敏度高等優點。其中近紅外濾光片為該裝置的核心部件。 本文介紹了利用特征矩陣法進行薄膜設計的制作方法。 采用Si和SiO2作為薄膜材料,利用ZX波長不同的長波通和短波通濾光片對接,以完成近紅外波段的帶通濾光片設計。 該濾光片ZX波長為1651nm,并在該波長附近的透射率可達到95%。 能翻多少翻多少 一句也行呀 呵呵 google的就免了,翻得好有追加,人格擔保~~ 展開
- 大物邁克爾遜干涉儀的問題~高分懸賞!
- 用邁克耳孫干涉儀作干涉實驗,設入射光的波長為 λ.在轉動邁克耳孫干涉儀的反射鏡M2過程中,在總的干涉區域?qū)挾萀內,觀測到完整的干涉條紋數從N1開始逐漸減少,而后突變?yōu)橥膱A環的等傾干涉條紋.若繼續轉動M2又會看到由疏變密的直線干涉條紋.直到在寬度 ... 用邁克耳孫干涉儀作干涉實驗,設入射光的波長為 λ.在轉動邁克耳孫干涉儀的反射鏡M2過程中,在總的干涉區域?qū)挾萀內,觀測到完整的干涉條紋數從N1開始逐漸減少,而后突變?yōu)橥膱A環的等傾干涉條紋.若繼續轉動M2又會看到由疏變密的直線干涉條紋.直到在寬度 L內有N2條完整的干涉條紋為止.在此過程中M2轉過的角度Δθ是? 求詳細解答~ 展開
- 高分懸賞基于Labview的虛擬傳遞函數測試儀設計
- 設計一個傳遞函數虛擬測試儀,學習系統傳遞函數、轉折頻率的測量方法,分析傳遞函數譜線圖的影響因素等。要求:它的工作狀態有‘實測’和‘仿真’兩部分。仿真用來分析一階RC低通濾波... 設計一個傳遞函數虛擬測試儀,學習系統傳遞函數、轉折頻率的測量方法,分析傳遞函數譜線圖的影響因素等。 要求:它的工作狀態有‘實測’和‘仿真’兩部分。仿真用來分析一階RC低通濾波器的傳遞函數,輸入的方波信號與被分析的一階RC濾波器均由軟件生成;實測功能則是通過數據采集卡采集信號發生器產生的方波信號作為輸入信號來測定一個實際系統/環節 。 QQ:8705573 可追加分?jǐn)?shù),分?jǐn)?shù)不是問題。會的話加我QQ! 展開
- 畢業論文《基于DSP的余弦信號發生器》 急求!高分懸賞!!?。。。。?!
- 希望按照畢業論文的格式,必須有程序可以運行出來,好的話可以出更高分懸賞!... 希望按照畢業論文的格式,必須有程序可以運行出來,好的話可以出更高分懸賞! 展開
- 急?。。。。「叻謶屹p(100分,還可加)英文論文翻譯~
- 標題:TwoRF/MicrowaveSoftwareProgramsUsedinTandemStreamlinetheDesignofPowerThisarticledescribesaprocedureforthedesignanddevelopmentofpoweramplifiersusingharmonic-balanced... 標題:Two RF/Microwave Software Programs Used in Tandem Streamline the Design of Power This article describes a procedure for the design and development of power amplifiers using harmonic-balanced software in tandem with impedance matching network synthesis software. For this purpose a particular design problem will be discussed. 這是文章的開頭部分,還有結尾部分,如果這個文章覺得可以翻譯的話,留下郵箱或qq號,我發文章過去,翻譯完滿意就給分,絕不含糊:) 展開
- 請近來幫忙分析下尿常規 高分懸賞啊 ~~~
- 前段時間我檢查了尿常規 有潛血 蛋白尿 幫忙看看 08年1月12號diyi次檢查結果 尿沉淀 紅細胞72.30 參考值 0-26 結晶標記+ 尿干結果 蛋白尿+1 隱血+3 經過ZL 2月1號檢查結果 紅細胞41.40 參考0-26 細菌4366.30 參考0-4000 隱血+- 大哥幫忙分... 前段時間我檢查了尿常規 有潛血 蛋白尿 幫忙看看 08年1月12號diyi次檢查結果 尿沉淀 紅細胞72.30 參考值 0-26 結晶標記+ 尿干結果 蛋白尿+1 隱血+3 經過ZL 2月1號檢查結果 紅細胞41.40 參考0-26 細菌4366.30 參考0-4000 隱血+- 大哥幫忙分析下啊 紅細胞ZL中間正常過 現在又高了 展開
- 邁克爾遜干涉儀測空氣折射率公式 急!??!高分懸賞
- 就是里面 壓強,折射率,光程差變化等等的關系
- 高分!計算機、嵌入式高手進,萬分感謝??!
- cpu真正處理一個進程的時間,比如我們的cpu,當一個.exe程序需要處理時,不是一直占用cpu吧,我原來聽老師說真正占用cpu時間只有很少的一段。但是持續一直運行,不占cpu如何繼續下去,是不是內存? 問題1: 打開一個realplay播放器看一部電影,是不是從開始一... cpu真正處理一個進程的時間,比如我們的cpu,當一個.exe程序需要處理時,不是一直占用cpu吧,我原來聽老師說真正占用cpu時間只有很少的一段。但是持續一直運行,不占cpu如何繼續下去,是不是內存? 問題1: 打開一個realplay播放器看一部電影,是不是從開始一直到結束1個多小時一直占用cpu?我覺得占cpu只有很少的一段時間。大俠可否詳細給小弟說明下,謝謝啊! 問題2:是在S3C2410平臺上可以同時打開多少個madplay播放器運行? 問題3:ARM9的指令周期大約是7.6ns(內核時鐘為120MHz時),是不是看一個程序的執行要多少條指令,那么這個程序就占用多長時間的CPU? 我寫論文對這些很困惑,要是大寫可以很好地解決我的問題,我可以再加200分!拜謝?。? 展開
- [高分懸賞]delphi richedit載入網絡上的文本并且不可編輯
- 新建個form放上richedit,從網絡上讀取文本并且在處于不可編輯狀態,比如載入http:\\192.168.1.1\text.txt顯示在richedit的文本框內,并且別人用dele刪除不了,[代碼處理的好再給加分... 新建個form 放上richedit ,從網絡上讀取文本并且在處于不可編輯狀態,比如載入http:\\192.168.1.1\text.txt 顯示在 richedit的文本框內,并且別人用dele刪除不了, [代碼處理的好 再給加分拜謝] 展開
- 高分懸賞。滿意追加100?。?!陶瓷勺燒成方式有哪些
- 想做陶瓷的勺子。。請教各位。勺子有哪些燒成方式呢??? 越多越好。。謝謝了~~~ 滿意追加一百。
- 高分懸賞,單色,像素96寬*16高的Logo,格式為bmp
- 如圖一樣,單色,形狀酷點,Z好不要帶中英文字,只有圖案Z好,多發幾張。
- 誰能推薦一些用在YL方面比較好的紅外熱像儀產品?高分懸賞
4月突出貢獻榜
推薦主頁
最新話題





參與評論
登錄后參與評論