国产三级在线看完整版-内射白嫩大屁股在线播放91-欧美精品国产精品综合-国产精品视频网站一区-一二三四在线观看视频韩国-国产不卡国产不卡国产精品不卡-日本岛国一区二区三区四区-成年人免费在线看片网站-熟女少妇一区二区三区四区

儀器網(yiqi.com)歡迎您!

| 注冊2 登錄
網站首頁-資訊-話題-產品-評測-品牌庫-供應商-展會-招標-采購-知識-技術-社區-資料-方案-產品庫-視頻

問答社區

箱式電阻爐為什么要烘爐?如何正確使用馬弗爐

owen天蝎 2016-12-01 04:13:55 659  瀏覽
  •  

參與評論

全部評論(1條)

  • DuckRem 2016-12-01 15:59:24
    1.diyi次使用馬弗爐或長期停用后再次使用時應先進行烘爐,溫度200~600℃,時間約4小時。使用時爐膛溫度不得超過Z高爐溫,也不要長時間工作在額定溫度以上。 1 the first use of the muffle furnace or long-term disabled again after use should be oven, temperature 200 ~ 600℃, time of about 4 hours. When in use, the furnace temperature shall not exceed the maximum temperature, don''t long time work in the rated temperature above. 2.為確保馬弗爐的使用安全,必須加裝地線,并良好接地。工作環境要求無易燃易物品和腐蝕性氣體。使用時爐門要輕關輕開,以防損壞機件。在爐膛內放取樣品時,應先關斷電源,并輕拿輕放,以保證安全和避免損壞爐膛。 2 to ensure the safe use of the muffle furnace, must be the installation of ground, and a good grounding. The work environment requirements non flammable items and corrosive gases. When using the door to light off light to open, to prevent mechanical damage. In the furnace put samples, should first turn off the power supply, and gently, in order to ensure safety and avoid the damage of the hearth. 3.為延長馬弗爐使用壽命和保證安全,在設備使用結束之后要及時從爐膛內取出樣品,退出加熱并關掉電源。 3 to extend the service life of the muffle furnace and ensure safety, should be promptly removed samples from the furnace after the equipment using the end, out of the heating and power off. 馬弗爐的使用方法2: Using the method of muffle furnace: 1、 當電阻爐、茂福爐、馬福爐、箱式電阻爐diyi次使用或長期停用后再次使用時,必須進行烘爐。烘爐的時間應為室溫200℃四小時。200℃至600℃四小時。使用時,爐溫Z高不得超過額定溫度,以免燒毀電熱元件。禁止向爐內灌注各種液體及易溶解的金屬,茂福爐Z好在低于Z高溫度50℃以下工作,此時爐絲有較長的壽命。 1, when the resistance furnace, Mao Fulu, Ma Fulu, the box type resistance furnace used for the first time or long-term disabled again after use, must be subjected to drying. Baking time should be at 200 ℃ for four hours. 200 ℃ to 600 ℃ for four hours. When in use, the highest temperature shall not exceed the rated temperature, to avoid burning electric heating element. Forbidden to perfusion liquid in furnace and soluble metal, muffle furnace best below the maximum temperature is below 50 ℃, and the furnace wires have longer life.

    贊(11)

    回復(0)

    評論

熱門問答

箱式電阻爐為什么要烘爐?如何正確使用馬弗爐
 
2016-12-01 04:13:55 659 1
箱式電阻爐與馬弗爐有什么區別?
 
2014-06-22 00:54:11 697 3
箱式電阻爐/馬弗爐,這些都有什么區別
 
2018-04-21 21:51:17 690 2
箱式電阻爐/馬弗爐,這些都有什么區別啊
 
2011-01-04 00:15:17 542 1
箱式電阻爐和馬弗爐是一種產品嗎?
 
2013-10-16 14:43:45 495 1
空氣電阻爐和箱式電阻爐時一樣嗎
 
2016-08-02 20:14:54 660 1
箱式電阻爐2.5-10 精度是多少
 
2017-06-21 13:58:33 494 1
馬弗爐停用多久需要烘爐?
都說馬弗爐長期停用后再次使用需要烘爐,我想問一下,這個“長期”指的是多長?請大師明示。
2013-10-23 01:12:59 567 2
箱式電阻爐的溫度控制器怎樣調試
 
2015-09-20 05:57:42 472 1
箱式電阻爐具體有什么用途?
2015-12-29 00:48:17 470 2
箱式電阻爐,管式電阻爐和坩堝電阻爐分別是怎么加料的?
 
2012-12-28 13:10:14 544 1
馬弗爐和電阻爐有什么區別?
 
2014-04-28 01:40:22 683 2
箱式電阻爐與電熱恒溫干燥箱區別
 
2012-07-11 22:12:59 593 1
SRJX-4-13箱式高溫電阻爐,溫度升不上去是什么原因?
爐子功率4KW、額定溫度是1300℃,發現有根硅碳棒斷掉了,就把所有的硅碳棒都換掉了(8根長450mm電阻約5歐姆),按照說明書上的接線方法:分別四根串聯,然后并聯,但是電源跳閘;之后... 爐子功率4KW、額定溫度是1300℃,發現有根硅碳棒斷掉了,就把所有的硅碳棒都換掉了(8根長450mm 電阻約5歐姆),按照說明書上的接線方法:分別四根串聯,然后并聯,但是電源跳閘;之后嘗試將8根硅碳棒串聯,爐子可以工作了,但是溫度達到900℃左右就再也升不上去了,可能是什么原因呢? 展開
2010-12-18 15:47:30 607 6
高溫電阻爐與馬弗爐的區別是什么?
 
2012-06-19 13:50:35 806 3
箱式電阻爐是不是馬沸爐?如果不是有什么區別?
 
2012-04-29 10:17:42 618 1
馬弗爐 熱處理爐【電阻爐】可以用來熔煉鋅合金嗎
 
2013-06-13 14:12:59 488 2
熱處理爐,馬弗爐,電阻爐,實驗電爐是一種東西嗎?
 
2014-05-29 17:56:02 670 2
如何正確使用發酵罐
 
2016-12-18 08:12:20 617 2
如何正確使用液相色譜儀
 
2016-12-01 22:48:47 554 1

4月突出貢獻榜

推薦主頁

最新話題