數字語音采集和頻譜分析外文翻譯

shi377988 2016-06-02 08:25:15 406 瀏覽

參與評論

評論

登錄后參與評論

全部評論(1條)

夢色未央 2016-06-03 00:00:00

數字語音采集和頻譜分析 Digital voice acquisition and spectrum analysis 數字語音采集和頻譜分析 Digital voice acquisition and spectrum analysis

贊(2)

回復(0)

評論

評論
登錄后參與評論

登錄或新用戶注冊

微信登錄
密碼登錄
短信登錄

請用手機微信掃描下方二維碼
快速登錄或注冊新賬號

微信掃碼，手機電腦聯動

注冊登錄即表示同意《儀器網服務條款》和《隱私協議》

熱門問答

數字語音采集和頻譜分析外文翻譯:

怎樣用mutlab做語音信號采樣和頻譜分析:

外文翻譯《建筑的組成部分》: StructuralSystemstoresistlateralloads這篇外文的作者是誰我想知道他的作者是誰... Structural Systems to resist lateral loads 這篇外文的作者是誰 我想知道他的作者是誰 展開

畢業設計外文翻譯，高手請進，感激不盡！: ResearchonIntegrationofCoalMineMonitoringandControlSystemwithFieldBusControlSystemAbstract:AccordingtotheconstructionofcurrentcoalminemonitoringandcontrolsystemsinChina，t... Research on Integration of Coal Mine Monitoring and Control System with Field Bus Control System Abstract:According to the construction of current coal mine monitoring and control systems in China，the paper proposes three kinds of applicable schemes of integrating PLC and DCS systems with field bus technology to digitize the system and to improve the flexibility and extent of the system.Essentially，the paper introduces the integration of FCS on I/O layers.Based on a real coal mine safety-monitoring and control system applied with a CAN field bus，the major technology of system relays and extensions is discussed.We believe that one of the most applicable methods is currently replacing the connection between function-stations and field-sensors with a CAN bus on I/O layers for system integration. Key words:monitor and control;field bus control system;CAN;integration 1 Coal Mine Monitoring and Control System and Field Bus Technology As one of the most important methods to improve modern management and production efficiency in coal mines，monitoring and control technology have been widely adopted to maintain safety in coal production.Taking advantage of foreign technologies from the 1980’s，coal mine monitoring and control systems have expanded rapidly in China.At present， automatic control has come into use in most large-scale coal mines，which greatly improved production efficiency and safety and lowered costs. In China，most sub-systems of coal mine systems work independently.They follow a DCS system structure of three layers(center layer，sub-station layer and sensor layer)which consists of a tree to-pology.They are composed of sensors，sub-stations on or under the ground，center stations，multiple controllers and display terminals(Fig.1).They work with analogue signals of 4–20 mA or 200–1000 Hz. Each coupled cable can only act as one line for transmission[1]. Currently control networks have been developed for digitalization and networking.Because traditional analogue signals of 4–20 mA or 200–1000 Hz can only carry simple measurement information and con-trol signals，the communication rate is restricted. Therefore，it is necessary to digitalize and network the entire monitoring and control system. Fig.1 Traditional Structure of Coal Mine Monitoring and Control System 展開

基于單片機的氣體傳感器的外文翻譯。要來自外文期刊。: 論文需要。求各位大神幫忙。感謝感謝！小的跪下了

怎樣用matlab對語音信號分解及頻譜分析？:

求善良的人幫我翻譯一篇外文感激不盡: t treatment， seeding by 3 wt%ZrO2 as glass-composite and pulverization affected the amount， size and distribution of crystalline phases. SEM-EDS and XRD results revealed that crystalline phases presented in the devitrified glass–ceramic ... t treatment， seeding by 3 wt%ZrO2 as glass-composite and pulverization affected the amount， size and distribution of crystalline phases. SEM-EDS and XRD results revealed that crystalline phases presented in the devitrified glass–ceramic were barium aluminate (BaAl2O4)， barium aluminosilicate (BaAl2Si2O8) possibly with boron associated in its crystal structure， and barium zirconate (BaZrO3). CTE of the devitrified glass–ceramic was in the range of (10.1–13.0) 106 C1. Good adhesion was obtained both in the cases of glass and devitrified glass–ceramic with YSZ and AISI430 stainless steel. Interfacial phenomena between these components were discussed. 2008 Elsevier B.V. All rights reserved. 1. Introduction Solid oxide fuel cells (SOFCs) are a power source producing electricity via an electrochemical reaction. SOFCs have high energyconversion efficiency [1] and are environmentally friendly due to their low pollutant emission [1–3]. Electrochemical reactions in SOFCs occurred at the temperature range of 600–1000 C and required both oxidizing and reducing atmosphere [4]. Planar SOFCs are a type of SOFCs under development. An important consideration in planar SOFCs fabrication is hermetic sealing of all SOFC components， which are solid electrolyte， metallic interconnect， anode and cathode [5]. The seals must be thermochemically and mechanically compatible with other SOFC materials， should have high electrical resistance， and must be stable and long time durable under operating condition under H2 and H2O atmosphere [4，6]. Rigid sealing using glasses or glass–ceramics is a promising option 展開

外文文獻 基于MCU的信號發生器做畢業論文外文翻譯用的，謝謝了，:

基于MATLAB采集語音信號分析與處理: 要求： 1、語音信號采集錄制一段課程設計學生的語音信號并保存為文件，要求長度不小于10秒，并對錄制的信號進行采樣；錄制時可以使用Windows自帶的錄音機，或者使用其它專業的錄音軟件，錄制時需要配備錄音硬件（如麥克風），為便于比較，需要在安靜、干... 要求： 1、語音信號采集錄制一段課程設計學生的語音信號并保存為文件，要求長度不小于10秒，并對錄制的信號進行采樣；錄制時可以使用Windows自帶的錄音機，或者使用其它專業的錄音軟件，錄制時需要配備錄音硬件（如麥克風），為便于比較，需要在安靜、干擾小的環境下錄音。 2、語音信號分析在MATLAB軟件平臺下繪出采樣后的語音信號的頻譜圖。 3、含噪語音信號合成在MATLAB軟件平臺下，給原始的語音信號疊加上噪聲后，繪出噪聲的信號頻譜圖. 4.設計一種合適的濾波器，去除噪聲，得到原始的語音信號. 有哪位可以為我提供MATLAB源程序，多多感謝了!!! 展開

超聲波測距儀外文翻譯在哪個網站能找到:

快速fft采集音頻信號，如何進行頻譜分析: 用單片機采集音頻信號，將音頻信號進行傅立葉轉化后存在一個數組內，那然后怎么處理這些數據呢，才能得到對這個音頻信號的進行頻譜分析呢，想知道它是不是失真了，，請各位大俠幫助!!!

matlab中語音信號DSB調制與解調頻譜分析，見圖: 左邊是語音信號，右邊是語音信號跟cos(2*pi*9000)相乘得到調制信號，為什么中間看起來還有直流分量。

誰有關于污水處理或者組態軟件的外文翻譯（帶原文），急用！:

用MATLAB對語音信號做時域和頻譜分析。要求有詳細的程序，謝謝了。: 我的畢業論文是基于MATLAB的語音信號的濾波器的實際和實現，我的語音文件在E:\MATLA\work\hnist.wav我想知道時域分析，頻域分析。他們分別實現的程序。答的好的追加分。

要寫工控組態軟件的畢業論文包括開題報告、外文翻譯，怎么寫？:

如何采用matlab對單片機采集的數據進行頻譜分析？: 我用單片機采集到電動機的振動信號，并通過ad轉換器轉換為數字信號。但是，這些數字信號如何移植到matlab中，進行頻譜分析？

誰有基于LabVIEW的信道編碼系統的設計 外文翻譯文獻綜述急需:

基于EWB的函數信號發生器的設計 誰有想過論文還有外文翻譯:

語音交換機 和網絡交換機 有什么區別???: 語音交換機和網絡交換機有什么區別???如題，謝謝... 語音交換機 和網絡交換機 有什么區別??? 如題，謝謝展開

軟件翻譯和人工翻譯哪個好:

4月突出貢獻榜

推薦主頁

數字語音采集和頻譜分析外文翻譯

聯系我們

關注我們